2. analog
  3. 1226841663

Steam Cleaning - RCM or not?

I posted a couple of times yesterday about this over at AudioKarma, but thought I would ask here as well since Audiogon seems to be at the center of the steam cleaning information.

I tried steaming in earnest a few nights ago; I did an LP I've had for years that had had some minor mold on it, which I removed a long time ago with my RCM, but the spore pattern remained. It was gone in a minute with the steam, which I somewhat expected. What I didn't expect was how lifelike this 3rd pressing, orange-label Dynaflex LP suddenly sounded. Amazing!

My question is this; I'm really drawn to the idea of not using my 20+ year old RCM at all because of the noise, which I'm getting tired of hearing after all these years. I'd really like to be just steaming, lint-brushing with my home-made fluid I've been using a while, steaming again and wiping with a couple of microfiber cloths. That seems to work very well, except that I seem to be getting some gunk on my stylus now and again which may be lint from the cloths.

Is this a concern? I actually did this routine a couple of times to one side of an LP and then did the same thing but RCM'd and not microfibered the other side, and I would swear the non-RCM's side sounded slightly more real in each case. Sonically I'm completely okay with the cloths only, but am a little concerned about possible residue and whatever that is showing up on my needle—although my ears are telling me this is the way to go. Anybody else come to this conclusion?
vanmeter
btstrg
185 posts
 
What is the procedure for steam cleaning a record?? How far to you hold the steamer from the LP ?? Can someone either post or email me the procedure for steam cleaning, What steam cleaning I should get and were can I get one?
Thanks
thorman
1,262 posts
 
Btstrg: No major tecnique..Just go to Wallyworld or any discount type store and find a hand help steam cleaner..I found the Shark works very well with the ( aprox ) 4"wide attatchment..I try to keep the steamer about 3"-4" away from the record suface..Other than that it just takes a couple tries ( Practice on garbage record for )..I rigged a set up where ( record hangs on a rod ) so you can get at both sides ( with out handling ) ..and I steam both sides
( using Demin. water )and once steaming is done I spray a rinse (seperate spray bottle so it drips free )and them remove and lightly wipe with a Micro fiber cloth ..Records look prisinte once completed..You can't remove sctatches but just about everything else.
crem1
672 posts
 
Vameter : Do you know that lots of free Steam cleaning tips and explanations have already been covered in Two Steam Cleaning Threads , one currently active the other discontined. Both are worth reading.

The advantages of using a RCM were parced in these threads as were those that wanted to steam w/o the use of a RCM. From my perspective , steaming significantly loosens pressing greases that entrap all sorts of household gunk.This only gets worse as time moves on. The advantage of a RCM is that once the entraped materials are released ( either with or without record cleaning fluids ) a RCM Quickly, sucks up the released compounds. Of course , you can disregard using a RCM and rely on micro cloths. But, Should you own a RCM why not use it ? As for machine noise,a pair of inexpensive noise protectors works quite well.
vanmeter OP
33 posts
 
Because, I swear, in addition to the noise issue, I really think I am hearing a little more space and air upon playback when I don't use the RCM. As I mentioned, I did one side each of a couple of different LPs both ways and really think I hear a slight difference for the better. I could be crazy, too. I know, I know, change the pads, right? :)
oilmanmojo
472 posts
 
There are a couple other strings on this forum related to steam cleaning particularly the first one that will outline several iterations and methods to steam clean. Suggest you look at those too.
More to discover