Streamer Recommendation.


Budget 7000US$.  (+/-)

System: Amplification: Luxman L 509X.  Speakers: Joseph Audio Perspective.  DAC:  PS Audio Perfect Wave.  CD/SACD PS Audio Perfect Wave.  Streamer:  BlueSound Node 2.I

I am limited to WiFi, due to my router location.   I would like a high quality streamer without DAC that will provide a noticeable improvement over the entry level Node.

Any assistance would be very helpful.

 

 

rbsaudio

I had an Ethernet cable run about 75 feet from my router to my listening room for $600.  Much better idea than the mesh router path.

 

If you’re handy, you could do it yourself for under $100.

@rbsaudio 

I was Wi-Fi limited and tried extenders that sort of worked and finally ended up with the Netgear Powerline 2000. Had it about a year and it works great! Not one blip in a year! 
ZyXEL Pass-Thru Ethernet Adapter AV2000 Powerline 2-port Gigabit 2-Pack [PLA54https://a.co/d/2YNtgNY

All the best.

+1 @musicfan2349 on keeping the mesh satellite at least a few feet away from other audio electronics, especially tube preamps, and plan to use a good quality Ethernet cable to connect from the satellite into the unit. 

OP here.  I want to thank all the kind posters above.  What a wealth of helpful  information. 

I am leaning toward a Auralic Aries G2.1 (DAC less) transport with  2 TB SSD storage.  

I should make my purchase at the end of November(+/ -) I will post my impressions and set- up experience in Jan 23

At this point I will not bore you with the issues I would have in running cable (tri level house, block walls, flat roof, 13 Ft ceiling etc.).  

Anyway, thanks again.  

 

@rbsaudio

i think you are making a fine choice with the auralic, especially with your need to use wifi - you just need to make sure your wifi is solid, with strong signal

i would add though, in my music room i am using a mesh router satellite to deliver a ’virtual’ ethernet feed into my roon core/streamer, and it works very well -- one day i may bite the bullet, drill through and run an actual hardwire ethernet, but so far i have avoided that need with excellent performance with the mesh system