2. speakers
  3. 1239119759

Suggestions for speaker stand platforms?


My speaker stands are just barely tall enough and I'm considering putting them on platforms for extra height and to lower vibrations being transferred to the building.

My monitors are mounted on heavy stands spiked to the floor through a thick carpet and pad. My listening seat semi-reclines theater style. In the reclined position the speakers are just barely at the recommended height relative to my ears; the speakers are too low when sitting up. My living room is in a condo above a garage, but I'm still concerned about resonance bothering my neighbors.

My thought is to put platforms of a dense material under the speaker stands and down-firing subwoofer. The main goal is to elevate the speakers 2-3" while keeping the stands coupled to a massive object. A desirable side effect would be to reduce resonance being transferred to the building. The sub would probably benefit from firing into something more solid than the carpet, too.

Is this a reasonable solution or are there holes in my logic?
What material for the platforms would be best?
Should the platforms be bolted to the stands or should the stands be on spikes?

If more information is needed please feel free to ask!

Thanks in advance for sharing your insight and experiences.
fpeel
fpeel OP
455 posts
 
Jfrech, my current speakers are Merlin TSMs. The Hales are now gone, but were indeed great speakers.

While the Symposiums would be a great solution, new stands would be cheaper (and I don't like my neighbors that much!).

Stanwal, that would be a quick and inexpensive solution that at very least would make for a good test. I may give it a try. Thanks!

Dpatterson, I did take a look at Timbernation and they sell black lacquered maple blocks that would work and fit the aesthetic requirements.

Lots of good info. Again, much appreciated.
klipschfan
176 posts
 
Here is a solution for a 2" to 3" lift for 50 bucks or so.

http://grizzly.com/products/searchresults.aspx?q=granite

Pick the size that will fit for the top plate of your stands and use some Herbies dots under your speakers.

Or, find the size that covers the bottom plate of the stands and spike them directly to the granite.
fpeel OP
455 posts
 
Thanks, Klipschfan. Granite slabs were actually my first thought (remnants from a memorial company to deaden the room vibrations and really bring the greats back from the grave?).

Does anyone have an impression to share regrading granite vs. maple? I recall hearing that granite is prone to ringing.
supradupe
2 posts
 
don't waste your money with timbernation, that bloke is a joke. my 3" thick maple stand still missing the cone feet from him. 3 weeks after delivery, I am still not able to use the amp stand. It's not like I asked him to add the cone feet after he shipped it out. everything was ordered in the initial email. I spent over 300 for a piece of useless junk. Want nice maple stand, go else where.
arthursmuck
451 posts
 
more on Timbernation over at Audio Circle. Most interesting is when Chris from Timbernation weighs in on the issue on page 2...

http://www.audiocircle.com/circles/index.php?topic=67334.0
More to discover