Swarming!


Hi folks!

Hope everyone is doing well.

I just got my Swarm Distributed Subwoofer Array from AudioKinesis hooked up.

Wow!

Pre Swarm setup:

Office (10 x 14 minus closets):

Amp: Hegel H190 integrated, Bryston P26 preamp, Ampzilla 2000 Second Edition monoblock amps
Speakers: KEF LS 50 non wireless, Ologe 5, Magnepan LRS


So two subs arrived yesterday (Saturday).

With two subs and the Dayton amp, I first hooked up one sub in various positions on the floor.

Listened to a variety of music.
Played around with the gain.
After four crawls and two more "just to confirm" crawls, I located and left Sub 1.

I’m still a newbie here so apologies in advance if the proper terminology escapes me when I try to describe all the ways everything (not just the bass) just sounds a lot better.

While it sounded better than three other subs I tried, the bass got less clear soon after the gain was up enough to hear the sub and especially when I moved around the room.

Now, with Sub 1 optimally (for now) placed, Sub 2 took the rest of the evening.

Sub 2 is ceiling facing (3" clearance from the ceiling) on a long shelf behind the listening position.
Spent a few hours sliding it left and right, flipping it over to fire the port in the opposite direction, etc.

Flipped it three times.
My back was starting to complain when I first got it up on the shelf. These things are heavy and awkward to remove from a high shelf when flipping over, not to mention the heart stopping, lose balance or grip on the sub, close call moments!

Decided to leave it in the corner where the shelf meets the right wall with the port facing the corner and wait for the other subs.

The improvement, though not significant, was more than noticeable at my listening position.
The improvement started to get significant when I rolled my chair around the room or got up and walked around.

Things sounded pretty good in more areas of the room.
I heard more quality out of the newly added quantity of bass.

The other two subs arrived today.

Duke at AudioKinesis suggested varying the heights of the ceiling facing sub(s) if possible as this will affect the vertical plane.

So,...

Subs 3 and 4 are also ceiling facing with a 6" clearance located in the left and right front corners of the room.
They are perched on steel wire shelving units allowing for one inch height increments. The added storage space with the shelves is a huge bonus!

Turned the music back on a little while ago.

What a mind blowing experience!
While the LRS made the room seem bigger, with all four subs firing, the Swarm seemed to add body, intensity and dynamics to the "bigger room".  Just about anywhere in the room.

I can raise the gain much higher and actually enjoy the clarity and evenness in the added bass.
Bass is not lost at low volumes. I can actually hear more details in the bass without needing to raise the volume.

Absolutely love the LRS! Thought the bass was pretty good. Didn’t hit like the LS 50s but seemed more than adequate.
But after a satisfactory gain setting and listening with the Swarm added, I got up and turned the gain all the way down and listened to just the LRS.
The Swarm added such a high quality and intense "kick" to the low end that just went away.

This got me out of my chair again to bring the gain back up.
A remote for the Dayton sure would be great!

I just can’t imagine listening to my system without this really cool subwoofer solution!

Limited to a small room?

Yes, there are four sizeable subs and an additional amp to place.
I thought there was no way that would work in such a small 10’ x 14’room.

Why four subs?
For anyone not familiar with the Distributed Bass Array concept, search through these threads.
There are numerous postings on this by some really knowledgeable people. (millercarbon and noble100, especially)

With three of the subs up high, the fourth sub is the only additional piece taking up floor space.

It’s been only about 2 hours listening with the Swarm in place.
With just the first sub placed via crawling and the other three just put in place, everything sounds like my system had a major upgrade!

It’s actually quite shocking! Seriously.

Excited to experiment with the subwoofer heights, different amps and also with the LS 50s and Ologe 5s.

Kodus to Duke at AudioKinesis for building such an effective, simple and flexible subwoofer solution!

These things actually look pretty cool too! Zero WAF issues!


Stay safe and healthy everyone!

hleeid
@mizmike I use a 6' RCA cable in my Swarm.  Duke at Audio Kinesis suggested not going any longer than that unless running balanced.
Let’s clear the air since Millercarbon might have Vandersteen Bass EQ confused with an equalizer.

Both Tim and Duke know that I am a Swarm supporter if it works with your constraints and importantly crossed over to not impact stereo imaging which I highly value.

Vandersteen speakers with built in subs include 11 bands of asymmetrical ( more cut than boost ) below 120 HZ and importantly NOT centered on octaves but on prevalent modes in domestic rooms. swarm can be accomplished by adding Additional subs. The sub amps are rugged power factor and feed forward designs. Used Vandy subs without EQ are available around $500 ish here all the time. 

Duke provides great products and help grounded in science and listening- a refreshing behavior 

Finally many room mode calculators include visualization tools for nodes associated w planes / surfaces which may help you understand placed one or more subs up high.

have fun, enjoy the music !!! And the journey !!!
Also kudos to those using GIK and other acoustic treatments and science and listening to improve. Tim did you ever measure your room after treating ?
@mizike Look into wireless connection if you can't run balanced cable.  I don't have a specific recommendation as the ones I use are no longer made.  SVS has a wireless system and there are probably other options available.
@tomic601 +1 -  Duke provides great products and help grounded in science and listening- a refreshing behavior
More to discover