Synergistic Research Black fuese

Regarding bigger fuses please remember a steel standard Buzz fuse can vary over 15%.this is why the Very accurate Black fuse or boutique fuse may have popped they are within 1% typically.  With these fuses Allways go one size up. 
From a 2smp slow yo a 2.5 amp is fine  the majority of electronics are built with at least A 20% on average over head  for voltages in towns  can vary .

I'm in the UK, and I'm going to order some of the new SR Blue Fuses, I need 315mA for my Nagra CDP, PSU - ACPS-II 230V, but some say use a slightly larger fuse like your previous posts.

The next fuse up is the 500mA, would it be okay to use the 500mA instead of the 315mA on my Nagra CDP, my CDP is plugged iny my Isotek Nova that as the RCD trip switch protection.

I got 6 blue ones they are even better keeping the blacks as a spare and they do live up to the hype.But what about bees wax??

I am currently using the SR Blue,  They are an improvement over the blacks.  The best fuse  I have tried are the Audio Magic Bees wax fuses.  I have had such a high failure rate with them  that I stopped using them and  am hesitant to buy any more.  Now Audio Magic has a "Super  Fuse"  costing $250,00 apiece.  Too rich for my blood..  Anyone out there has tried these $250.00 fuses?  

In thinking about my question above, I'm safer sticking with the original 315mA, as here in the UK the voltage is around anywhere from 230V to up to around 250V, so the 500mA is 59% higher rating than the 315mA, i.e too high for our voltage, so the 20% to around the 25% margin really only applies to 115V. So here in the UK we are probably better sticking to the original fuse rating.