Teres Owners - Please help

When attempting use of a wall mount rack, be careful before drilling holes and positioning other associated equipment (regardless of table). As Schroder mentions, room nodes can be an issue - a serious issue. I built a wall rack using 1000lb rated Stanley brackets and a 3" rock maple base. I positioned where I THOUGHT I'd be okay and attached straight into wall the studs using SIX 3" lag bolts. The floor was a poured concrete slab. As one increased gain, the air borne resonances caused a terrible rumbling mess. Touching the wall near the supports - rock solid, not so much as a trace of vibration. Further out on the base - different story. Moral? The rack can be mounted like a pillar and while you can eliminate floor vibrations and all but eliminate wall vibrations, those air borne forces are much greater than one would think. A two foot repositioning solved the issue entirely, but the six holes required filling and repainting in the process.

.
Encyclopedia,
.
My two cents:
.
All the posts above are logical. My suggestion would be for a Teres 265 or 320 and definitely a Schroder 2 or Reference. The Schroder arms are just incredible. Get a Reference and you are done for life. You need a stable platform for sure (home made might save money to allow for the better turntable and arm).
.
Good Luck,
.
Rgds,
Larry
.

I am in the process of actually setting up my Teres, at last. Finally got my HHG equipment stand on Friday so I could complete this set up. Because of space constraints I had to put all of my audio components on one stand instead of having the turntable on its own stand, as is recommended. So I have a 4 shelf stand plus the turntable on the top; the stand is made out of hardwoods and granite. All of this is on a wood floor, too. The stand itself actually weighs 350 lbs, but it is still not as massive as some people consider adequate. I am hoping for the best. It sure doesn't seem to have any sway or reaction to people moving around in the house, but I don't have my tonearm/cartridge set up as yet, so haven't tested everything with a record playing.

Anyway, my situation isn't quite like yours other than not being ideal. I also have the Model 160 as opposed to the higher end models you are considering. But, though I have little experience with tonearms, so you can take this recommendation with a large grain of salt, I highly recommend the Morch DP6 tonearm. I heard it with a Model 255 and it was wonderful, and Chris was also highly pleased with the combo. I bought it from Chris the same day, with a 12" armwand. I will be using it with a ZYX R100H cartridge, their basic model (all I could afford) and it is also has great synergy with the Teres & the DP6.

Good luck, Encyclopediabsh. Let us know what you decide to do and which Teres you decide to get. They are all things of beauty!

Holly

Thanks to everyone for all the helpful suggestions. I really appreciate you taking the time to respond. I'll post a follow up after the final decision!