The Snob Appeal Premium


I have learned that speakers are a typical victim of "Designer Label Syndrome".  Supposedly an $8 billion a year market (hard to believe) speakers are fairly simple beasts with little substantive improvements over the last 50 years. Ever since Paul Klipsch ( a character in his own right) read the Bell Labs 1934 papers and revolutionized speaker technology there have been few similar revolutionary improvements to the speaker. So- if you are an enterprising manufacturer of speakers (which are relatively cheap to build) how do you extract more and more money from the consumer ?  Answer: Synthetic demand driven by cachet' !  Like a pair of Louis Vuitton sneakers @ $650 a pair vs. New Balance runners @ 60/pr. It's snobby bragging rights stuff I'm describing here- perceived vs. actual value in a product. 

Here's an anecdotal example: 

I recently set out to build a high end mid-fi system (ARC preamp, power amp, Dac 9) for a large room "main house" (not a listening room) system. The goal was big, full, rich sound in a room full of furniture, chow dogs, kids and untreatable other things like 20 foot ceilings, multiple openings such as a balcony to the upstairs bedrooms, etc. Basically an audiophile's nightmare. 

I auditioned a number of speakers- Perlistens supported by JL Fathom subs, B&W Signatures, Bryston Model Ts, Vienna Acoustics Mahlers and Bethovens. IMO all of these are somewhat similar towers (except the Perlistens). The price point was not as important as the sound- given the limitations of the application. 

In the shopping for new or used I found a number of odd prices. The most unusual finding was a brand new set of Model Ts here in Audiogon advertised for $4K with a 20 year factory warranty. The dealer had one slide around of his hand truck and it put white paint smears on a corner of the Boston Cherry cabinet. Hmmm- 4 grand vs. 12 grand for a small fixable cosmetic flaw? I bought them. They sound fantastic. Some elbow grease and a furniture marker pen made the flaw vanish. 

I asked the dealer (Paul Kraft in Easton PA- great guy BTW) why the Audiogon Blue Book for a Model T was so low. His answer was "snob appeal". Apparently there is a big bragging rights  premium paid for having the UFO looking B&W Signatures vs what the snobs call the Bryston Model Ts "Axioms in a fancy suit".  I later learned that there are some prominent reviewers who refuse to listen to A/B speaker comparisons behind a silk curtain unless they know what brand is being scrutinized. To me that means "payola". 

Do the Model Ts sound better to me than the Mahlers, Bethovens, B&Ws? No. But they don't sound worse either (in my application). Do the above sound $8,000-$14,000 better than the Brystons in the listening rooms of the dealers? IMO NO WAY. To be fair price/value does color my perception much like a bottle of $40 Rumbauer Zin tastes better to me than $200 Silver Oak expense account wine. 

I'm guessing this post will anger brand snobs and garner snarky comments because their taste in sound is different than mine. Although this missive is really about personal perceptions of value v. sound I found my education on pricing fascinating and I feel great about finding amazing value in the brand new Model T's that needed 30 minutes of TLC to be at home in my family room. 

Moral of the story: Try em before you buy em, and look for value. It's fun and rewarding with no buyers remorse. 

128x128Ag insider logo xs@2xyesiam_a_pirate

I had to read the OP a couple times to understand. Congrats on the Bryston's!  You compared resale value to B&W. Buying used or 'B' stock like you did is the only way to save yourself the gut punch of retail markup. When I consider how much of my money goes to taxes directly and indirectly then how much goes to retail markup I really wonder what we're going to do when we run out of countries to exploit! First world problems baby.

I gather your 'snob appeal' comment comes from B&W having better resale than Bryston speakers. Lets flip it tho'. If B&W started making conventional power amps I doubt they'd carry the same reputation Bryston amps have developed over the years.

We all have our own line drawn as to where we decide how much we'll spend for a specific feature or compliment of features. There's a whole forum dedicated to how a loudspeakers 'spins' are more important than how it sounds. There's experts stating the first dac's are audibly indistinguishable (spell check saved me on this one)from anything else newer that wasn't designed flawed. Some people look at me strangely and ask "so, you just sit in a chair and listen?" truly confused, because to many music is a tool to aid us in our chores, jobs, etc, but not an actual hobby in itself. 

@jtgofish 

Are Hardwood Speakers Really Bad?

There is a way to make hardwood speakers that might be tractable, but the front and back baffles have to be made of MDF or ply. Correct grain orientation of the sold wood panels eliminates contrary seasonal wood movement.

As this maker in the video above shows cabinet resonance can be obviated with damping materials. Also, a great many DIY'ers use wood braces. Granted, these are relatively small in cross-section, so wood movement is not much of an issue. I only mention it because sold wood has it's uses in cabinet construction - it's not automatically some bug-a bear.

Also, solid wood cabinets are easier to finish than veneered cabinets which can be finicky because of the thinner and thinner veneers being used. If the factory finish is something like poly then the strippers needed can soak through the veneer and loosen the underlying glue. If these refinishing process is not the first rodeo and previous refinishing involved sanding the veneer, then you can get perilously close to sanding through the veneer which is a mini-disaster from a decorative standpoint.

Anyone wanting to build a solid wood or mostly solid wood cabinet would also be advised to use a high quality shellac and keep water away from speaker. Most definitely keep alcoholic beverages away from it too, but the advantage of shellac is that it looks great done right and can be easily stripped with alcohol.

Also, if possible use vertical grain wood if at all possible - it moves less and stays flatter. Ultimate wood would be vertical grade old growth macrophylla mahogany. Not cheap and not easy to find. Quartersawn Sitka Spruce might be really good but also expensive.

Somewhere on Youtube there is a video of a European maker whose solid wood speaker cabinets use resonance and tailored crossovers to good effect. I think he was Polish - can't find him though.

If you enjoy your system every time you use it and the music makes you feel good, that is the goal for just about everyone. Artists, mixing engineers, musicians, mastering- every step HAS to be rewarding for the person doing that part of the process, passing it on, making it better. When I talk to these folks, they are in love with their work (most of the time), not unlike an audiophile loves his system (most of the time).  When its really good, it transports you.......

Brad

Jarrah -especially quarter sawn-is excellent for speaker building.It combines medium /high density [840kg/cubic metre] with a short grain structure and is very non-resonant.Also very good for turntable plinths and cartridge bodies [Grado uses it for some of their cartridges.

I have built really good sounding speakers out of it.A pair of Meniscus Audio Kairos for example.I agree you are best using MDF or ply for the front and back baffles.

Or you can use it for the front,back top and bottom panels [mitre joints] and MDF for the sides-over which you can glue "floating side cheeks".