The midrange units on the 3.5's are paper, while they have a pretty large magnet, and are otherwise well built they do have a tendency to need rebuilding from time to time. Thiel is very good about this. Even if one wanted to use a a sub-woofer I'd recommend using the EQ and using the 40 Hz setting. If your not going to use the EQ, you might as well go with a smaller, cheaper Thiel that will actually go lower than a non-EQ'd 3.5. The EQ does put demands on the amplifier though. I think most of the objections to the EQ are based upon some sort of purist's prejudice. Of course one alternative is to put the EQ in a pre-amps tape loop and depending to the music, one could switch it and out. The only real down side, is an extra set of cables and having the signal passing through the pre-amps circuitry one more time. Once in a while you can find a used 3.5 EQ on e-bay, a much less expensive and less complicated alternative than adding a sub-woofer. The 3.5's EQ's stereo bass will be much better than a cheap sub-woofers.
Thiel 3.5 equalizer advice
I am using Thiel 3.5 speakers without the equalizer. Does anyone have any insights (or firsthand experience) on the overall difference in sound that results if I bought and added one to my system. Does it just impact bass response or will it impact other sound qualities? Does Thiel still make the equalizers? Thanks for any insights.
- ...
- 18 posts total
- 18 posts total