Yes, the 3.6 and tubes are not the best match. The 3.6 like beefy solid state amplification.
Thiel CS3.6 and PrimaLuna
I have a pair of Thiel CS3.6 speakers and a Primaluna Dialogue Premium HP Amplifier going thru a Mytek Brooklyn DAC/Pre. The sound is really good, but I know the Thiel's can do much better. I'm curious to see if folks would recommend going to a different amp (high current SS) or moving to a different set of speakers. Either option is viable, just curious to see what folks think.
- ...
- 11 posts total
The Theil websites says they need 100-500wpc. Your Primaluna is 70-96 wpc depending on configuration. So, you are really at the bottom of the spectrum. Adding in the 2 ohm minimum of the Theil's and you are taxing the amp. You could try a pair of Zero Autoformers to help with the low impedance, but a higher rated amp is probably the best way to go. Those Theil's were one of the last of Jim's designs, so I would probably keep them. If you did want to change, I would recommend Vandersteen-both use time and phase alignment, and results in a similar sound reproduction. For amps, you could get an old McCormack DNA-1 and have Steve upgrade it. (Buy a non working unit and save more. Steve guts the amp and installs a new board, so it doesn't need to be working). For Tube amps I would recommend Atma-Sphere. Here is one review with Theil speakers; http://www.atma-sphere.com/Reviews/TAS-1991-MA-1.html Bob |
- 11 posts total