Thiel Owners

@tomthiel Thanks for the clarification. This pic
http://www.hifishock.org/gallery/speakers/thiel/cs2-4se-2-thiel/
shows "Jim Thiel Signature" versions SA 28uF 630V and SA 14uF 630V. I cannot see a 1uF cap in parallel. The values on the woofer section are not evident.

I did not see these values online at Madiscound or Partsconnexion. Maybe I didn't look closely enough?

Also, is the crossover accessed thru the passive radiator or bottom panel?

@dgarretson Thanks for the reply. So, are the CS2.4 values available to the public? I will contact Rob Gillum for more info.

@tmsrdg Thanks for that info. Looking again on Madisound in the Clarity Cap MR 400V (is that enough voltage?), I can get to 28 uF with a 27 and 1 uF in parallel. For 14 uF I need the 12 uF and two 1 uF caps.

But given that I already have the Clarity Cap SA version in the coax, I should start with the woofer section.

beetle, it is likely that my CS2.2 cabinet design persisted to the CS2.4. If so, the enclosure bottom dismounts with screws from the bottom of the base to expose the crossover mounted on the inside of the base.

Thanks, Mr. Thiel
I might pop one open this weekend and see what's involved as a DIY, see if I can find the values on the woofer section.