Thiel Owners

@tmsrdg Thanks for that info. Looking again on Madisound in the Clarity Cap MR 400V (is that enough voltage?), I can get to 28 uF with a 27 and 1 uF in parallel. For 14 uF I need the 12 uF and two 1 uF caps.

But given that I already have the Clarity Cap SA version in the coax, I should start with the woofer section.

beetle, it is likely that my CS2.2 cabinet design persisted to the CS2.4. If so, the enclosure bottom dismounts with screws from the bottom of the base to expose the crossover mounted on the inside of the base.

Thanks, Mr. Thiel
I might pop one open this weekend and see what's involved as a DIY, see if I can find the values on the woofer section.

Always good to see you here- dgarretson
Thank You for the valuable information regarding Clarity Caps. Easily, you are my "go to" guy. I hope you and Mr. Rob Gillum can acquire and stock these cross-over parts soon. Happy New Year.

Happy Listening!

To get to my crossovers in 2.4's I unscrewed the passive radiator. Then carefully I let the top nose sit down in the cross brace behind it and that allowed the bottom nose to be free to come up out of the speaker cabinet. Because everything fits so precise you want to be careful. And it is a little counter intuitive when you look at it and then do it. Be real careful not to pull or wiggle anything very strongly it all looks kind of delicate in there. It does come apart relatively easily. Anyway when you remove the passive radiator the crossover is easily seen and reachable.