tmsrdg, power isn't the most illuminating word, current into low impedance is a subset of power and the operative limitation. You can find out the 2-ohm spec on your amp, which should describe its capability. But, as Larry adds another consideration, current delivery spec can be construed over various time windows, so the spec can lie with demanding program material. Larry is right that Jim was a bit gobsmacked by the subjective experience of CS5 (and all our big products) users running out of bass power. The CS5 came after the CS3.5 with equalized bass, which also drew bass current, but at higher impedance than the CS5. We used a 250W Krell powerhouse which performs as rated, 1000WPC into 2 ohms. Jim assumed the role of the speakers was to perform to its stated specs, and the amp must do likewise and so forth. When manufacturers fudge such claims, the burden-in-fact falls to the speaker for under-performing. All these years later, these matters are still foggy in the mind of the audiophile world. Awhile ago I mentioned that I wish Thiel products had higher impedance minimums - 4ohms minimum as beetlemania (?) corrected my 6 ohm nominal wish. Same animal. We would all be better served via honest claims for our products.