Totem forest And Mass loading

Yes, Totem Forest needs some power.

Impedance: 8 ohms (6.4 minimum)
Sensitivity: 87 dB
Recommended power: 50 - 200 W

Jakecanada, you have a nice amp, maybe underpowered. Do try the Cary cad120s, but to help the imaging i hope you are using room treatments. Front wall (behind speakers) plus side walls. Look at the Virtual Systems section for ideas.

I recently emailed vince at totem acoustic to see if my little amp would work and what was his thoughts? He said

There are few products that communicate “music” and the deep message behind it. The entire Totem product range is magical with tube gear, because of the harmonic integrity nescient with some exceptional tube equipment. In the end I think that 40 Watts in triode class A is enormous and it is not the wattage in the end but the quality of that wattage that is most important. IN most instances the Cary SLI 80 / Forest combination should be ideal since 40 W in Triode Class A is more that sometimes 60-80 Watt in ultra linear. One of my brothers drives a pair of Element Metal speakers with a 24 Watt per channel single tube 211 based triode amp and that is sufficient for him because he wishes for clarity/involvement/purity over the highest dB’s he can obtain. The 60 Watts we recommend is a general guideline for more ordinary equipment. I would recommend that you try a different power cable/interconnect before thinking of going to 60 Watt. Sometimes less is more. Your ear and good judgment has brought you this far and you should continue using this in a well controlled and calculating way to choose what is right for you. Your heart will tell you what is correct.

Best regards and many thanks Vince Bruzzese

I did take a look at my room which I am listing too and my speakers are 17inches from the back wall and spaced in between the sides of my fire place. I still do not have proper power cord for my amp just a $5 cord. Planing to get the new shunyata Eton viper after i pay off my cd player. This weekend when i pick up my new cd player, I am going to try half a pound of shot and another half of play sand. Basically one pound but to totem recommends 2 pounds as a minimum. but I will go no further with 2 pounds max for me. Like other audigon's say to much would take away the image. But some mass loading I notice it dose make some more unveiling detail stand out .
I do want to upgrade my amp if one day I could get the totem element Earth's

Jakecanada.

Go ahead and mass load your speaker. The bass will tighten up and the micro and macro dynamics will astound you. There is nothing but vibrations in those cabinets that is robbing your speakers of there potential. I have about 110 lbs of stone pavers on top of each speaker and the performance has gone beyond anything I could of imagined before adding the weight. Vince knows along with any other speaker manufacturer that by adding weight to the cabinet the performance will dramically improve. Remember your speakers were built to a price point, add some weight to the top and you will thank me.