2. amps-preamps
  3. 161993-9347

Tube Amp lower power vs higher power and cruising volume

After having Solid State my entire life thus far, I bought a PrimaLuna EVO 300 integrated and absolutely love it. I am currently driving 20 year old B&W CDM9NT's and it does a wonderful job, I never heard my B&W's have that much bass before, even at lower listening volumes. The EVO 300 is rated at 42W. Since I recently purchased it I have the option for a brief time without losing money to possibly move up to the EVO 400 integrated which adds 4 more output tubes and gives you 70W. I believe the 300 and 400 both use the same transformer because they both weigh the same 68 lbs. So my only reason for possibly doing this would be for future speaker upgradability having a little more power. I know my B&W's are not the most efficient and the 300 seems to be driving them very well, volume rarely goes past 9:30/10. So my question, if I get a higher power model, since I listen most of the time at comfortable listening levels, with a higher power tube amp will you have to turn it up higher to hit that cruising speed where it starts to open up? The 300 seems to hit that early and I listen at comfortable levels and good extended bass without having to crank it which is nice when I am listening at night and my wife and daughter are sleeping. Overall I am very happy with the 300 but while I have the option I am trying to decide if the extra for a 400 is worth it. Thanks
128x128jmphotography
millercarbon's avatar
millercarbon
12,531 posts
 
The great Robert Harley said, "If the first watt isn't any good why would you want 200 more of them?" Its not the amp that "opens up" its the speakers. Tube amp sound is mostly like Ralph said transformers and driver circuits. Its superficial repeating what they heard audiophiles who think its the tubes. More power is not the answer. Doesn't seem like you need it anyway. Only reason you mention for wanting more power is to enable buying even worse sensitivity harder to drive speakers in the future. Now why would you want to do that???! When you have a really sweet sounding amp, I would think the priority would be to buy speakers it can drive, and not the other way around. Problem solved.
wsrrsw's avatar
wsrrsw
1,016 posts
 
@jmphotography 

Were the KT88's broken in? 

Can you try the 400 to see if what you hear is life changing or maybe a changeling?


jjss49's avatar
Ag insider logo xs@2x
jjss49
6,612 posts
 
Tube amp sound is mostly like Ralph said transformers and driver circuits.

miller

yes, mostly true i would say, but it is interesting that in an amp like a primaluna dialog hp that allows you to hear different power tubes with the same input stage and transformers -- the different character of various power tubes (el34/kt77, 6l6, 6550/kt88) is immediately noticeable, as is even different makes of tubes (chinese vs russian kt88’s for instance)

another point to add here is that a bit of an oddball amp (but an utterly brilliant one) is a david berning (linear tube audio) zotl amp which is devoid of output transformers... i haven’t messed with one of these OTL since 20 years ago with the ginormous fourier triomphe otl’s ... but the zotl40 ref i recently got in is a revelation, so clean clear and extended top and bottom with lush mids and wonderful imaging (and so small and light in form factor)... very very impressed with what this little company (lta) has done...


cat_doorman
237 posts
 
70W vs 42W is only 2.2dB. You can almost get that by leaning forward in your chair. 

I got a DPHP because at the time my speakers were lower sensitivity and I wanted a little extra headroom. I was in denial thinking I’d want broadcast volume thump available from a tube amp when the reality is I rarely push it above 90dB any more which could be done on 10W. Plus I still have my old higher power SS integrated if I’m aiming to do damage rather than just listening. 

Since I was new to tubes, I didn’t fully understand how expensive it is to roll power tubes when you have 8 of them or what I would enjoy most from its character. I doubt I’ll ever feel a burning desire for KT150s just for the novelty at a cost of $600+. It cuts down on the experimentation side of things which was one of the reasons I wanted a tube amp in the first place. Hoping Santa brings me some GL KT77s to compare to the 7581As I’m using now. 

hoosierinohio
162 posts
 
In my opinion, it’s about matching speaker sensitivity to the amp.  That said, I have found that “higher power” amps, especially solid state, you have to search for the sweet spot on the volume knob. That point where every instrument is playing at its best. I currently drive high sensitivity speakers with 6 watts of set power and It is perfection, at least to my ears. Not just at the sweet spot but exactly what you are experiencing, at lower volume levels. If you are thinking about a less efficient speaker, something like a maggie you will need lots more current and watts.  Had some 3.5r’s and found them as sensitive as a rock, they needed lots of juice.  Sounded great but needed the proper amp. If you are going to stay with what you have, for a while, don’t rock the boat. That said if your next step is falling for a different speaker, no matter the efficiency, cross that bridge when you get to it. 
More to discover