2. amps-preamps
  3. 1283995384

VAC Renaissance Pre-amp owners - Help

Just got my VAC Renaissance Signature MK II back from VAC. Have it all hooked up but no sound from any on the inputs including the phono. I ruled out the interconnects and the amplifier. Has to be something stupid like a switch. I'm using all RCAs and all the switches are set to SE. The output has two sets and I tried using both but nothing.

All the light are on. Any suggestions would be appreciated.

Thank you.
128x128pookie10
dev's avatar
dev
832 posts
 
do you have it muted
pookie10's avatar
pookie10 OP
41 posts
 
No. I actually opened it up and the 8416 tubes are not on. I swapped them out with another set but they are not turning on either. I have a feeling that's the reason.
chuck
207 posts
 
Have you checked the source/Tape knob. you may have acciedntly moved it to tape mode. make sure it is in source mode and the unit is lit all blue.

Johnny
fplanner2010
283 posts
 
Just call Kevin or Brent at VAC and they will be able to get you going immediately.
rhljazz
1,255 posts
 
Maybe check to see if any of the pins have backed out in the umbilical connector.
More to discover