Vandersteen 5A Speakers

Thanks Johnny for the expalination on the setting of the angle. I will recheck the angle of my current 3A's. I do notice that if I slouch down in my chair the left speaker is smoother on the top end. No trouble with the right.

Thanks

Russ

RussB
one other thing...
make sure the speakers are side to side level as well
placing a bubble level on top of the 3asigs and get them
exact even if you have to install an extra washer on one front side more than the other.
Cheers Johnnyr

Johnnyr

Thanks for the advice. I will check all my settings this weekend. Have a good one.

Russ

Wanted to thank everyone for there responce, and advice.

I checked all my settings this time using a laser level. I found that the left speaker was off in the tilt even though both speakers had the same amount of spacers installed. I feel this is because the floor is not the same on both sides. After I leveled both 3A's out and got the tilt set to match each other the sound stage has realy locked in, even the bass has improved. The top end is alot smoother still with detail. Centering of vocals is now dead center when the music calls for it to be. It is amzing how a few adjustments made a difference.

Thanks Again
Russ

Most floors are off I think we all need to get out the level.
Great News happy listening...
Johnnyr