Variations of the Micro Seiki MA505 tonearm

I may have to disagree with Thom on this one, unless I am not understanding his statement. I have the MkI version and it allows VTA (as well as VTF and anti-skating) on the fly. On my arm I twist the lever to loosen it, then I can move the lever to the right or left which results in the arm being raised or lowered. While the on the fly feature is nice I would not recommend it for anyone who does not have an extremely steady hand. To much room for error leading to potential cartridge and other damage. I did it once and feel fortunate I did it right. Never again though.

I have the S shaped tonearm and my experience from Thom's is different here as well. After attaching the MS headhsell to the arm I was able to adjust the azimuth by twisting the shell. At first I thought I may not have turned and tightened the collar properly, but it appeared I did and was still able to move twist the headshell. Maybe I still haven't tightened it properly???

Dear Clio09, Your description appears to be correct based on photos of the early versions of the 505 found in Micro Seiki publications and on-line in For Sale ads. Looks like, as you say, you can twist the knurled knob at the end of the stalk that projects out from the locking collar for the arm post, so as to be able to adjust the height up or down by a few mm's at least without fear that the arm will come completely loose and fall to its base setting. My MkIII does not have that capability. Maybe MS thought this was an unsafe feature and therefore delete it from the MkIII.

Lewm,

On Vinyl Engine there is a copy of the MkIII instruction manual. You do not have VTA on the fly. You have to loosen the lock lever to make the adjustment. There is even a warning to make sure you somehow anchor the arm in the process so it doesn't drop quickly and damage the stylus or record.

On the column of the MkI there is a slanted spiral groove etched into the column. The nub at the end of the lever fits into this groove. So when you slightly loosen the lever, it provides the ability to slide the arm up and down. The danger is the nub is small and if it comes out of the groove the arm will sink quickly.

I imagine you are correct that MS felt the original design was not fool proof enough. So they decided to replace it with something a bit safer.

As for azimuth, it does not appear you can make the adjustment via the headshell. However, can you loosen the screw that tightens the arm tube and rotate the arm tube to make the azimuth adjustment? My Kuzma Stogi allowed for this type of adjustment. Maybe the MkIII provides the same capability.

I'll defer to Clio09 on the VTA on the fly option. It's been about 6 years. I apologize for the misinformation.

From your descriptions, it sounds as if the VTA "on the fly" function is identical to that of the Dynavector DV-507 - a helical slot which is engaged by the wand. As you rotate the wand, it drives the arm up or down.

This is potentially a *very* dangerous arrangement (at least with the DV-507). The temptation is to do it on the fly, and if you unscrew the wand by one turn too many (when unlocking it), CRASH !!! ... with unpredictable consequences.

The good news about this arrangement is that if you're not tempted to adjust on the fly, it still gives you a fine and repeatable adjustment - place arm on rest, unlock lever, perform adjustment, lock lever, and listen.

The azimuth adjustable headshell relates only to arms like the Mk-I which uses a standard headshell (e.g. Sumiko, Artisan, etc.). The removable arm wand on your Mk-III has an integral headshell and does not allow for azimuth adjustment. Of this, I am certain.

Once again, I apologize for generating any confusion about the VTA on the fly. 6 years is a long time.

Cheers,
Thom @ Galibier

Thanks for your input, Thom. Since the VTA is easily adjusted, though not "on the fly", I have no complaint. I do however wish there were a mechanical adjustment for azimuth. I guess I am spoiled by my long term experience with the Wheaton Triplanar.