Vinyl distortion - What's the problem?

Sorry I forgot to say the first time that the cartridge is on a brand-new Rega P25 with the stock 600 tonearm. I checked the alignment with the shure alignment card that came with it and set the tracking force for the recommended 1.5 grams with the brush/stabilizer. I don't know what azimuth adjustment is, so I suppose I didn't adjust that. I'll check with a level tonight to see if it is sloping any direction. Looks fine to the eye, but maybe that's not good enough.

One other thing you might check, is to see if your stylus cantilever is bent. You can check this by looking at it directly from the front when it is on the arm rest. It it does not look like it is centered, then it could be bent. This would require a new stylus assembly.

You don't have to worry about adjusting azimuth on the Rega. Make sure the anti-skate is set to the same setting as the tracking force.

try tuning out the distortion by adjusting the anti-skating force +/- the optimum setting designated by the cartridge mfg. the exact setting proscribed isn't always the best on any given arm/cartridge combo.

The procedures suggested above will probably identify your culprit, but if not, you should also try to rule out any possible problem with the electronics/cables chain the TT is feeding (I'll assume you have already ascertained that the problem is not present on any other source besides phono).

You can do this be reversing the leads coming from the TT at the input to the phono preamp. If you reverse the leads, and the problem remains in the same channel, then your distortion is originating somewhere between your phono inputs and your preamp outputs.

However, if you try this and the problem switches channels, but nothing suggested above has helped, then suspect something in the lead-out cables or jacks themselves, with the jacks being the most likely.

As you've already tried switching channels, as Zaike suggests, it's probably either: a) the electrical connection in the cartridge-to-phono chain (have you checked the pins on the cartridge?) b) a problem with the cartridge. So, Twl has a point -- if not, then it could be a problem with the coils. (I hope not). Good luck!