OK… after some mis-starts.. I’m up and running on battery.
With my system, on my utility/home wiring and with my power solution, which includes an Everest 8000, there is a night and day improvement in what I hear. It might be a bigger step up than when I added my Everest 8000. Everything is improved, dark background, dynamics, sound stage…Very simply sounds much like the performance is in the room. Juan described things and I had a show-me attitude, but trusted him sufficiently to spend the $1600. Best $1600 spent on my system, but you need to know what you are doing if you want to be alive to listen to the results. Power levels involved are nothing to take lightly. I’m not sure how to take this with respect to the Everest, but one of the main jobs of the Everest is to electrically isolate all components and adding it when on AC greatly improved what I was hearing. Interestingly, dynamics and speed are greatly improved and this carries over to the bass. The bass is much better controlled and very fast. I didn’t realize that I was missing anything. My inverter/battery are capable of putting out 20+amps directly wired to outlet, but as I have it setup, through the built in plugs, I’m limited to 15 amps.. but for some reason it is not the 15 amps plugged into the wall. As usual 300 watt/channel A/B power amp and 900 w/channed class D subwoofers plugged directly to their own channel on Everest. I should mention, unlike Juan, I wasn’t on a dedicated 20 amp AC power line.