2. analog
  3. 1189136049

What is the correct way to use the Zerostat?

Hi fellow members,

Need some help with my Zerostat gun used for my vinyl records.

First, should the record be spinning on the platter when I slowly squeeze and slowly release the trigger aimed at the record on the turntable, or should the record be stationary while I pull and release the trigger?

Second, what's the nozzle with a lightbulb that came with the Zerostat do? Is this a test? How do I use it? There was no instruction manual in the box to tell me how to use it.

Third, no matter how slow I pull or release the trigger, I still get a click noise from the Zerostat. Based on reading forums, it appears that if you hear clicking noise, that means I pulled/released too fast on the trigger. How slow is considered slow ?

Any help/feedback would be nice.
studio68
mescabo
7 posts
 
Does anyone know if the Zerostat wears out after many years.
I have had had mine for 15-20 years(the older model)

Thanks
chadnliz
3,736 posts
 
Studio, the cap is a test bulb, if you get a light it is supposed to be working but is not for daily use.
studio68 OP
17 posts
 
I see...thanks Chadnliz.

Mescabo, according to the Milty Zerostat box, they wrote the gun lasts for about 50,000 trigger operations.
tgrisham
1,291 posts
 
I have yet to wear mine out after 30 years.
gdhugh's avatar
gdhugh
4 posts
 
From the web:
This amazing little device known as the Zerostat Antistatic Gun is an antistatic "generator" which has numerous applications in any microscopy laboratory. Just squeeze the "trigger" of the Zerostat and a steady stream of ions is released. The "magic" comes from two powerful piezoelectric crystals and a patented compression trigger. Originally developed for removing dust from "vinyl" and before that, normal "phonograph records". In later years the Zerostat antistatic gun was discovered to have great applicability for use in a photographic darkroom to remove dust from film and negatives. After that, a wider range of applications came into being when people running SEM labs found out that it was also ideal for eliminating dust from critical samples or other critical surfaces when the dust attraction was being caused by electrostatic charge. Others have reported that certain insulating specimens, when treated this way, can actually be viewed (admittedly briefly) by SEM without the need to apply further coating.

Each Zerostat unit has a "two cycle" type of operation. When the trigger is squeezed, positive ions are generated and when the trigger is relaxed, negative ions flow. This means that it is possible to induce a charge on a neutral surface using the Zerostat. If the trigger is squeezed, and the Zerostat is removed from the surface before allowing the trigger to return to its original position, a positive charge will be induced. Similarly, pointing the Zerostat at the surface only for the release of the trigger will induce a negative charge
More to discover