Which Power Cords: I Need Some Informed Guidance

Neutron, boy, you have jumped off into the cable deep end! Not much to add on the ICs.

As for building power cables, I have rudimentary experience with wiring and electrical circuits, so in terms of construction of power cables have been trying to educate myself about materials and what factors are really important. In terms of assembly, there is nothing really tricky about it, but if you really screw up you can blow a fuse or some tubes at best, or start a fire in the worst case.

On that cheerier note, here are some sites where you can get some more information pon building your own PCs:

VH Audio: http://www.venhaus1.com/diymains.html and http://www.vhaudio.com/index.html

DIY Audio Projects: http://diyaudioprojects.com/Power/diyMains/

DIY Cable: http://www.diycable.com/main/default.php

ok nasaman, you got me there. i'm getting a little ahead of the game, but an opportunity arose to buy the audience speakers, so i jumped at it. right now, i still have the stock pc on the cdp. earlier on, knownothing suggested the taipan vx, and i'm presently leaning in that direction (especially since i've tossed the budget out the window), but acquiring another audience "e" is not out of the question.

now i also have some interesting reading with regards cable construction. i think it'll be helpful getting acquainted with some of the fundamentals.

but right now, i'm like that little electron whose been bitten by some energy and jumped headlong into that higher shell. pretty soon though, i'll emit enough light (or spend money, in this analogy), and dutifully fall back to my original state, where i'll be content.

"...where do you get plans for assembly"
- It's not that complicated. It could be anywhere.

"what raw materials and tools are needed"
- As Knownothing stated, it could be just a simple screwdriver and a wire stripper /cutter. Ohm meter is highly recommended to verify continuity. However, I order my heat shrinks and snake /flex skin from PartsExpress.com; the Wattgate plugs from Ebay.

"and how do you decide on materials"
- It's trial and error process. I just continue to build one after another and compare them with the name brand ones that I have. But even diff wires from Home Depot give diff sound from each others.

Neutron, if you like, PM me with your mailing address and your desired length, I will send you 1 of my DIY. It's yours to keep.

"i now need interconnects, and would like to run some possibilities by you,"
- Neutron, first, I'm sorry I'm totally unfamiliar with the 3 name brands that youare listing above, but since I have great experience with the interconnect RCA LC-1 from BlueJeanCable.com. It's very affordable ($30/pair), give it a try. If some cables sound bright, others sound neutral or light, warm, or yet grainny, the LC-1 sounds very rich and punchy. I like it to go with my SF GP Home Series when listen to guitar, viloin, or percursion. However, it's doing just everage in vocals, classicals, and live music concert. It's very slightly lacking of the fineness and classy sound as the Transparent Reference's. I used to swap cables back and forth but I always ended up with the LC-1 in my electronics. Ince your case, I'm not sure how it'll intereact with your Krell, but it would probably matched nicely with your Cambridge CDP. Give it a try.

If you are leaning toward taipan i would email grant at shunyata.Get his opinion on which would be more approriate.He is very helpfull,i think the right cable on your cdp is the final icing (as well as conditioner).I never thought it would make as much differance since low current.Python on cdp made a huge differance.No more wondering if i try this cable.