??? Wood Plinths: Layers: 7/2/1 ? Wood Type: Solid or Veneer or Vinyl Wrap wood look ?

Aside from construction, I was hoping we could gather together descriptions of the final finish surfaces.

Big JVC Victor Plinths are real wood veneer, with a semi-gloss finish.

The type of wood veneer, i.e. walnut, rosewood, .... it is actually hard to know for sure, it may be they specifically selected highly figured walnut and added a reddish color stain which makes you suspect rosewood. In any case, very nice.

The arm boards are 3/4" thick, also special bonded layers, same veneer.

The grain pattern on the arm boards is the same direction as the deck, and very well matched, however the arm board(s) could have been moved from one plinth to another, or purchased separately, and years of light can discolor portions of the deck, so a faded armboard might not look good in an un-faded deck.

Ask about existing holes, the distance, center of spindle to center of hole. and the diameter of the hole. Depending on the size of an arm's base plate, you can 'ease' a hole a bit farther or closer by enlarging the hole a bit one way or another. worked for my rear arm.

When you add a long arm, things get tricky. If it had a Victor 7082, that is 282mm center to center, 11-1/8". I put my Blackbird arm, 12.5" center to center, new location, then had an exposed hole. It was a 1-1/2" hole, so I bought a 1-5/8" bit, drilled a round plug out of 1/2" wood, the plug just smaller than 1-1/2". Blackened top surface with marker, and taped the plug in from the bottom. Now there is a 1/4" round recess where I keep the 45 adapter, looks nice.

btw, that Blackbird arm rear counterweight portion of the arm just fits inside of the huge dust cover, and I cut a notch in my dust cover for the arm’s junction box, (the Russians at New Art Vinyl don’t like the sound of DIN connectors), so the cartridge wires start above the deck. I could have drilled a small hole, put the box below, or put the box on the rear face of the deck, but the wires are the most delicate silk covered litz wires I ever saw, and considering future changes ... He says there are 38 strands of individually coated copper inside the silk sheath. Hell to deal with, but sounds terrific.

Well my Victor CL-P2D plinth, dust cover and TT 61 motor drive came in today. Not only is it big it's very heavy as well.
The plinth is in very nice shape, a real beauty. My armboards are a bit different than most I see. They are perfectly rectangular. This will make it easy to make extras.First order of business is to mount my Audio Technica ATP-12T tonearm in the rear position. I need to find a chunk of 3/4" aluminum, I'm going to make a new armboard for that position. There is already a hole about 1" away from where the new hole needs to be. I'll save that for future use. The armboard on the right side has never been drilled. If I find a Victor UA-7082 tonearm, it will go in that position.
BillWojo

Why the heck do you want a cover in the first place? It’s useless except if you want to degrade sound quality by having it in the down position while playing LPs. This remark will get Mijostyn interested in your thread. So I have done you a favor, maybe. Otherwise, you guys do realize, don’t you, that you could be having this conversation with each other by email?

Why the heck do you want a cover in the first place?

Why do most TT have covers or rather "Dust Covers"? Do I really need to answer that question?
BTW, the dust covers on this size plinth don't hinge, they are to big and heavy. You just pick it up and set it aside when you want to use the TT.
The dust cover that comes with this table is thick PlexiGlas and crystal clear. As someone who spent a few years working in a plastics fabrication shop I can testify to it's very high quality.
I'm really impressed with the quality of this Victor table, it far exceeded my expectations. I'm sure Elliott would tell you the same.
BillWojo