yet another KAB mod question

I typically set the VTA by sight (tone arm parallel to the record) and by sound, so the I don't really need the indicator. I agree with Tvad that the benefit is worth the minor inconvenience.

If you look - you'll find that the VTA reading on the collar at the arm lift lever is exactly 2.5mm (I think... I'm not at home to check the exact amount) higher than the actual VTA setting.

In other words - if you align 4.5 with the leading edge of the opening the silver arm lift lever comes through on the arm, the VTA will be set at 2mm.

I'll double check the numbers when I get home tonight - but I'm pretty sure it's a difference of 2.5mm.

I installed the silicone damper (blue) on my Tech deck in my main rig. Also picked up that ugly-ass KAB rubber record clamp, but it works. Kevin, if you read this, you need to upgrade that syringe, it is a POS. And please put a note on the install instructions to let the silicone acclimate to room temperature before installing. It will help the cause with that useless syringe. Also, I was storing the clamp on my BB slab, it stained the damn finish, and it won't come out.

Here is a link to my system...

http://forum.audiogon.com/cgi-bin/fr.pl?vdone&1102716162&view