Eminent Technology ET-2 Tonearm Owners

I wanted to back up here a bit in regards to my system and my viewpoints. I realize that my system is not as revealing as most of yours are, but my comments are from my system's perspective. (I've owned my arm for over 20 years, just in the past year have gone with a high pressure compressor). I use 3 moisture separators and as a last line of defense, use a descicant dryer on the outlet side of the final regulator/moisture separator, that is about 3' from the tonearm. My compressor is in the same environment as is the rest of the system, although in a different room.
Whew!
A note, these arms are awesome! From a tweaker's perspective, guys or gals with a mechanical apptitude, and from anyone with a drive to seek excellence from their stereo system, this arm will always surprise and deliver but only with the love and care you put into it.
I thought from the beginning of this post that wire type would be a major source of discussion and it turns out the couterweight bolt mod is up for grabs. I personally am satisfied with my tonearm wire set-up and won't be seeking further improvements in that area anytime soon. The counterweight issue: I can only speak as to what I hear in my system and it's limitations. From a logical perspective, having the weights extending further out on the scale, to me, isn't a smart way to go because the further out you go, the more of the teeter-totter effect or see-saw effect (as Chris stated) there will be. (This is of coarse with the stock scale, not with a custom made Balsa wood item). (Frogman, I would love to see your set-up). I too, feel that arm/cartridge compatibility would be an issue here as well as is the TT type of suspension, if any, and getting really technical, the room construction and isolation systems that each one of us has deemed right for their own system. I personnally didn't know that the 2 counterweight beams provided with an arm were different in any way. Dover, we're waiting for your pictures.
This discussion is great! Maybe we should form a once a year ET owner's annual get-together? Of coarse it needs to be hosted by Bruce himself.

..... I posted my "virtual system" only for the sole purpose of sharing my tonearm wire/routing set-up. I thought it could be useful for others....... Admittedly, I could have done a better job.

This (ET) thread was that important to me.

Oilmanmojo,

Thanks a lot for posting about your tonearm wire. I just want to get something straight, though. You said you bought 0.015", 0.010", 0.005" diameter wire from A-M Systems. In your system page, you mentioned using 0.003" wire in your tonearm tube. Did you also use 0.003" wire? That must have been even more difficult to solder than the 0.005" wire.

Frogman... as a funny antidote... are you any kin to R. Vandersteen?

Another important factor as far as my limited experience is concerned (with regards in making your own tonearm wire), the cartridge ends, (the ones I used are great!), they are extremely solid(silver,of coarse), with a hole made for the exit of any air/gases when soldering to ensure a extremely tight/worry-free joint.