Ct, please keep us posted re the use of the double spring. BTW, I have been tempted, but resisted so far, to super glue the stylus assembly/carrier to the cartridge body. I did it to my ATML170OCC for a nice improvement in refinement. Those removable stylus carriers even though they appear to fit tightly in the body of the cart will benefit from the extra rigidity.
Apbii, my comment about clogged capillaries was a general comment. It doesn't sound like yours are clogged. But I realized that I misspoke (miswrote?) in my comment about the over tightening of the bolts. I was
referring to the two bolts (four total) on either side of the VTA block. I never asked Bruce about this in the handful of conversations I have had with him over the years, but I suspect that in the case of my arm it was a machining error that caused those holes to be tapped so long to pierce the manifold housing. Perhaps not, and all arms are that way so careful with over tightening.
David, re suitable tables: I first mounted my ET on a VPI HW19 Mk 2, upgraded to a MK 3, then a Mk 4, and currently my TNT Mk 6 (actually,
it's a bit of a hybrid. Mk 6 with a Mk 5 platter). That series of tables make terrific platforms for the ET. There is ample space for the arm, and the spring suspension can be replaced with less compliant sorbothane or cones which is ideal for the ET. When the ET first came on the market it was the general consensus that a non-sprung table was best; although I always found it interesting that the ET website and manual shows it mounted on a SOTA which is sprung. Another popular combination was the ET on the Oracle; and man, that combination LOOKS cool. Personally, I would look for a HW19 MK2,3, or 4(best) if you want a
moderately priced table. Not sure what you consider moderately priced, but an older TNT is even better. I am currently lusting after a Technics SP10 MK2, which I suspect would be a fantastic combo with the ET on the right plinth.
Apbii, my comment about clogged capillaries was a general comment. It doesn't sound like yours are clogged. But I realized that I misspoke (miswrote?) in my comment about the over tightening of the bolts. I was
referring to the two bolts (four total) on either side of the VTA block. I never asked Bruce about this in the handful of conversations I have had with him over the years, but I suspect that in the case of my arm it was a machining error that caused those holes to be tapped so long to pierce the manifold housing. Perhaps not, and all arms are that way so careful with over tightening.
David, re suitable tables: I first mounted my ET on a VPI HW19 Mk 2, upgraded to a MK 3, then a Mk 4, and currently my TNT Mk 6 (actually,
it's a bit of a hybrid. Mk 6 with a Mk 5 platter). That series of tables make terrific platforms for the ET. There is ample space for the arm, and the spring suspension can be replaced with less compliant sorbothane or cones which is ideal for the ET. When the ET first came on the market it was the general consensus that a non-sprung table was best; although I always found it interesting that the ET website and manual shows it mounted on a SOTA which is sprung. Another popular combination was the ET on the Oracle; and man, that combination LOOKS cool. Personally, I would look for a HW19 MK2,3, or 4(best) if you want a
moderately priced table. Not sure what you consider moderately priced, but an older TNT is even better. I am currently lusting after a Technics SP10 MK2, which I suspect would be a fantastic combo with the ET on the right plinth.