Chris: Your comment about this hobby having alot to do with resonant behavior got me thinking of some reasons the Acutex may be more suitable with the ET. Setup at proper overhang, the armwand is slid (back) fairly far within it's adjustment range, therefore to me it seems that gives the armwand increased structural ridgitity thereby reducing resonances. Of course, I have limited experience with cartridges compared to most of you.
Eminent Technology ET-2 Tonearm Owners
Where are you? What mods have you done ?
I have been using these ET2's for over 9 years now.
I am still figuring them out and learning from them. They can be modified in so many ways. Bruce Thigpen laid down the GENIUS behind this tonearm over 20 years ago. Some of you have owned them for over 20 years !
Tell us your secrets.
New owners – what questions do you have ?
We may even be able to coax Bruce to post here. :^)
There are so many modifications that can be done.
Dressing of the wire with this arm is critical to get optimum sonics along with proper counterweight setup.
Let me start it off.
Please tell us what you have found to be the best wire for the ET-2 tonearm ? One that is pliable/doesn’t crink or curl. Whats the best way of dressing it so it doesn’t impact the arm. Through the spindle - Over the manifold - Below manifold ? What have you come up with ?
- ...
- 2373 posts total
Just to say one more thing about listening to the Acutex... I'm enjoying listening more than I have in some time. The album sides seem to be over with before I know it. To me, this is probably due to the "ease of presentation" provided by this cartridge and the totally relaxed feeling I get while listening. |
The weekends... I got it! I have around 21 hours on the Acutex. Still loving it. I'm becoming one with this transducer and therefore am more aware of what's going on now, that it's becoming of age. Starting to get slightly annoying in the mid to upper, mid-range. Not really any other issue, well, a little sibilance. I know exactly what's going on , because I've experienced it in my system and other's, with different cartridges. If you look back at my intitial posts, you'll see that one of two caveats I mentioned in setting this cartridge up with my current wire loom was not having the center spindle height close to the lp surface. This, as explained in the manual, is very important. I know from personal experience that this will cause the very issue I'm currently experiencing with the Acutex. Annoying in the mid to upper, mid-range, also it can result in splashy treble. Fixing my cartridge clips so I can ultimately lower the armwand assembly at the same time as acheiving top of cartridge being parallel with lp, will absolutely take care of this issue. |
Remember this turntable link I posted a little while back. Nakamichi ET 2.5 Well its up for sale :^) Just having my morning coffee and I came across it. No affiliation with this at all. Just thought it was kinda cool to come cross it. |
- 2373 posts total