2. misc-audio
  3. 1233355857

Shipping Questions - First Time Seller

I'm preparing to sell my old ARC amplifier, and while the Audiogon FAQs cover most aspects of selling, I'm unsure how best to prepare the amp for shipping (I want to have all my details worked out before I post the classified). I have all the original double box packaging from ARC. I assume I should remove the tubes, wrap them in bubble wrap, and put them on the chassis under the cage? The original packaging doesn't have any place for the tubes external to the amp itself. Since the packaged weight is 80 lbs, is the ARC packaging sufficient by itself? When I purchased this amp the dealer delivered it and set up the system, so I don't know if he received the amp in a crate, on a pallet, etc. Lastly, since the boxed amp is very awkward to carry (really needs two people), does UPS come to your door? Thanks for your advice, I want to make sure that when I do sell it, the potential buyer gets the amp in the same condition I sent it.
palewin
larryken
537 posts
 
that's going to be tough to ship successfully. I'd call the dealer of ARC and see what they recommend.I'd also ship with the tubes in place.
brownsfan
1,508 posts
 
I recently shipped monoblocks which were about 60 lbs each. I reinforced the original packing with additional Styrofoam panels, then over packed the original boxes with additional Styrofoam panels inside new boxes. I talked to the guy at Fed-ex, who told me everything should be packed to withstand a drop from 3 feet. The most common event is for a box to fall off of a conveyor belt, which is about 3 feet high. Make sure they put fragile and heavy stickers all over the box. You may want to pack the original box, then have Fed-Ex or UPS over pack in a 2nd box. They are a bit less reluctant to pay damages on something they have packed. Sending the tubes separately is probably a good idea.
buconero117
2,311 posts
 
In addition to double boxing and all the brownsfan comments, it needs wood crating with metal straps.
Post removed 
jax2
3,031 posts
 
I always remove the tubes and ship them separately by USPS Priority Mail. For an amp like that it is cheap insurance and the buyer would probably agree. The tubes will arrive before the amp as USPS Priority is usually about 2 days. At 80lbs I think you are over the UPS limit (which I believe is 70lbs). The question is not whether they'll drop your box, it's from how high and how many times :-) Honestly, if you ship your package across the country via one of the big shippers it will likely end up on miles of conveyor belts used for sorting and moving. Those belts are several feet off the concrete ground and packages can fall off of them. That is why UPS specifies that you pack your items to sustain a 3 foot free fall. I've had great luck with USPS Priority, but your package will be certainly too big to ship that way. I'd agree completely with those who advise a beefy outer box or crate for a component of that size. Probably the safest shipping method for a large heavy item is strapped to a pallet by air freight. I've used a terminal to terminal company called Forwardair, but they're only in specific metropolitan areas and they are only terminal to terminal. Check in your area for freight shipping options that will strap to a pallet and insure electronics for possible loss or damage.

Good luck, and good on'ya for asking first.
More to discover