2. analog
  3. 1325551242

Eminent Technology ET-2 Tonearm Owners


Where are you? What mods have you done ?

I have been using these ET2's for over 9 years now.
I am still figuring them out and learning from them. They can be modified in so many ways. Bruce Thigpen laid down the GENIUS behind this tonearm over 20 years ago. Some of you have owned them for over 20 years !

Tell us your secrets.

New owners – what questions do you have ?

We may even be able to coax Bruce to post here. :^)

There are so many modifications that can be done.

Dressing of the wire with this arm is critical to get optimum sonics along with proper counterweight setup.

Let me start it off.

Please tell us what you have found to be the best wire for the ET-2 tonearm ? One that is pliable/doesn’t crink or curl. Whats the best way of dressing it so it doesn’t impact the arm. Through the spindle - Over the manifold - Below manifold ? What have you come up with ?
128x128ct0517
richardkrebs
422 posts
 
Ketchup
I should have added. The lack of the arc feature is not a big deal for me since I don't change carts often. Others who do, would find this feature helpful.
ketchup
700 posts
 
I need to do the math, but I bet the change in overhang is pretty small with the typical VTA adjustment.

If I were to build one, I would machine the arc with a rotary table and a milling machine (because I don't have cnc capabilities).
dover
2,265 posts
 
Hi Chris, thanks for the complement. Yes I do try to be flexible. I am contemplating a post grad course in pseudo science at the Massachusetts Institute of Technology. This may help me comprehend some of the recent posts on the forum.
john47
50 posts
 
"I am contemplating a post grad course in pseudo science"

So you've already graduated/excelled in pseudo science.
richardkrebs
422 posts
 
Ketchup
Yes agree, I would use a rotary table which we now have. But is it really a big deal if you don't change carts often. Critical in any design would be rigidity once set.
More to discover