Heres an interesting side story: A few years ago I replaced all the switches and wall plugs in the house because we changed the color to white. This place was built in 1979, so the originals were a bit different than what is available today. I did not buy the "pemium" ones at home depot because I needed so many. Ever since this, it has been very common to blow a light bulb upon flicking the switch if you do it too fast. I can even blow them on demand if I use the switch accordingly. Turning it on gently... no problem.
Light bulbs are constanly burning out
Frequently, when I switch light-switches on, I burn out light bulbs and at times a breaker jumps.
I am preparing to purchase new tube amps, (I currently have a ss amp). I am worried that these surges may cause damage to the new tube gear.
I live in a newly constructed building (4yrs old) which is shared with 5 other tenants. Throughout the building in the hallways and such, there are always burnt out bulbs. Bulbs last less than 6 month on average (incandescent, halogen and fluorescent)
This seems to occur randomly, last time was in the evening 8pm, whereas the time before it was at 4:45 am.
Need I be worried?
What can be done to solve the root of the problem?
What can be done to mitigate the risks? I already have a surge protector but I only have my Pre-amp, TT & TV plugged into it. I find the amp sounds better straight in the wall.
I am preparing to purchase new tube amps, (I currently have a ss amp). I am worried that these surges may cause damage to the new tube gear.
I live in a newly constructed building (4yrs old) which is shared with 5 other tenants. Throughout the building in the hallways and such, there are always burnt out bulbs. Bulbs last less than 6 month on average (incandescent, halogen and fluorescent)
This seems to occur randomly, last time was in the evening 8pm, whereas the time before it was at 4:45 am.
Need I be worried?
What can be done to solve the root of the problem?
What can be done to mitigate the risks? I already have a surge protector but I only have my Pre-amp, TT & TV plugged into it. I find the amp sounds better straight in the wall.
- ...
- 21 posts total
I have this issue in Austin. My voltage is about 127 volts. 127V is too high... For residential customers the utility company is supposed to keep the voltage with-in (+ or -) 5%. 120V being the base line. You should contact your utility company and ask them to check your incoming voltage. It may be a simple fix of moving the taps on their transformer to lower the voltage. |
- 21 posts total