2. misc-audio
  3. 1264628480

Oyaide, Hubble, FIM etc, any consensus on flavors?

I’ve decided now to replace my hospital grade outlets with some more upscale outlets.

I’ve found thru the archives so far, there are several models in the Oyaide line up, and perhaps some of the others too, like Watt Gate, FIM, Isoclean, etc.

Something tells me they don't all do the same things

If someone could give me some inkling as to what each Oyaide model’s electronic flavor is, it would be greatly appreciated. Are there 3 or 4 models now out from Oyaide?

… but then I don’t know for sure as to which outlet from which co will give which results.

All lines are dedicated 20A

Main 2ch rig is all tubes.

Any insight on the varied flavors of the Oyaide, Isoclean, Hubble, FIM etc, would be immensely appreciated…. For at this time they all look alike to me except for their prices of course.

Naturally, I'd be inclined to spend more for the 2ch tubed rig, than I probably would on the HT side... but then, who knows?

so far the only insight I have is on the 3 Oyaide units:

1 Silver/Rhodium � Pure, strong, solid, uncolored reproduction � providing a very extended sound field.

2 Direct Gold - bold, sweet, luxurious, dynamic and lucid character

3 Gold/Palladium � the character of Gold with an added vibrancy and a cooler, fresher feeling Oyaide

...which I took from a resellers web page.

your thoughts?

Many thanks as always.
blindjim
chadeffect
586 posts
 
I found the gold Oyaide and the gold furutech to be the best outlets I tried. They sound similar to their equivalent plug. Both plug and socket add to each other and amplify the character.

I have a very clean system and was looking for a little warmth. The Oyaide was just the ticket. It has a slightly fatter and richer presentation than the Furutech.

The Furutech also has a slight artificial sparkle in the treble. The Oyaide seemed more natural in my set up.
donjr
1,335 posts
 
Sorry to bud in on your thread Blindjim. I'm about 3 hours into burning in the new dedicated circuit with the Porter Port. I can mention one thing that I noticed right off the bat. The slight hiss I used to be able to hear through the speakers at idle from about 18 inches was reduced to only being able to hear it from about 6 inches. This isn't something I'm imagining, it's more than 50% quieter and more similar to my old solid state amp as far as what's coming out of the speakers when no music is playing. It was never noticeable unless I was up close to the speaker, but now I have to practically rest my ear on the grill to hear it.

I think I'm going to take Blindjims advice and just let the comparison of the new and old go by the way side. Out with the old, in with the new. If I don't notice anything more than I already have, I'm still glad I did it knowing that my wife was curling her hair on the same circuit.
blindjim OP
3,092 posts
 

Chadeffect

Thanks.. that's excellent info.

Did you go whole hog and add the $200 face plate on the Oy Gold?

$200 cover plates simply kill me. i don't know whether to laugh or cry.

Donjr
Great! Glad to hear things have stepped up a notch or three for you there.

I designed in some features in my latest house... Everything was brand new from the ground up... it seems to me things did not get right sounding for a pretty good while... A year? perhaps two actually. That incidental is also why I grazed into the power cond fields.

At 4 years it was better for sure. other items in the home don't affect things as readily now, like printer, chargers, phones, wall worts.. etc.

Congrats.
chadeffect
586 posts
 
Hi Blindjim,
umm... cry first then straight into mad laughter as you reach for your wallet. The face plate does seem excessively expensive.

I do not use one. I have not tried one either. It probably works. Oyaides thing is all about damping and good tight connections with the various choices of metal. They are all subtle effects, but there. The further down the line you are with your system the more important they become.

I do have 3 different separate sockets which are the Oyaide XXX and 2x GX. To put face plates on too would start to get daft. But maybe I will save up!

BTW they take a long time to burn in. The XXX took ages. The sound of these sockets changes over a few weeks. They become more invisible and natural sonically as time passes, but the noise floor remains super quiet. Worth it for that alone, apart from the slight "tonal" change.

I wish I could change the sockets on my PS audio regenerator to Oyaide. It seems sensitive to power cords so the sockets would do something I am sure.
blindjim OP
3,092 posts
 

if there's one way to dampen or isolate, there's another. Which is superior seems the issue.

$200 for a cover plate allows for a whole lot of trial and error attempts to surpass the carbon fiber ones.

Why can't you open up the PSA unit and install other outlets? too tight? outlets are the wrong size?

Seems a simple enough task provided the outlets match in depth and area dims.. and of course if not, keeping the origs and later on putting them. back in seems a valid enough idea.

Personally I don't feel it a big deal or some great wrong will transpire if a switch out is made, but there is always that, "If it ain't broke, don't fix it" notion.
More to discover