Grand Prix versus Stillpoints

Isolation only exists in the absence of matter. If you design a product based on the false premise that isolation is possible in the dimensions in which we exist then you wasted your time and energy. The much more effective resolution is to design a pathway for resonant energy to pass to ground. Even in archaic and so-called isolation systems resonant energy will eventually find its way out and to ground but very slowly leaving vague musical memories of notes of the past. Much like an inferior capacitor distorts and blurs the sound stage. All of my components and boards, speakers, drivers....they are all assembled as a conduit to ground. No mud or rubber or carbon fiber in between. The racking system has been on the market for years...

Theaudiotweek, only you speak of isolation. I said a rack is a starting point and to hear your system at its best you will need some devices that control and dissipate vibration from the audio unit's (CDP,amp,pre,ect.) outer case in order to hasten the removal of the resonant energy and the vague musical memories you referred to in your thread. I use no mud, rubber or carbon fiber either so I am not sure why you mention that as we were discussing ultras and their ability to act as conduits for vibration with either hardhats against units case or attached as footers. You still do not mention which rack you use, but even in your thread you mention rack AND PLATFORM SYSTEM,not just rack. And that is my point, you need more than just a rack, so your comments about isolation seem misplaced as vibration control is where the subject was. Also your statement to design a pathway for resonant energy to pass to ground is exactly what the ultras do and what I have been saying is needed BESIDES a rack.

Theaudiotweak, I have another axiom-you cannot ever have too much isolation, or at least too many Ultra SSs. I have heard the benefits of Ultra SSs on the sliders on my StillPoints Component stands. A substantial improvement. I have heard also the benefits of Ultra SSs as the feet under this stand. Another major improvement. A friend reports the benefit of using an Accapella platform on the Ultra SSs on sliders above and with another layer of Ultra SSs on the platform.

Even with the "new technology" in my StillPoint Rack, I found major improvement with Ultra SSs under components on the acrylic shelves on the Rack. StillPoints even notes that putting the Ultra SSs directly on the rails of the Rack and not using the acrylic shelves is a major improvement.

What impresses me with all of this is how insidious vibration is. No one has mentioned the vibration of cables, but again I know all too well, that there is great benefit for isolating them from vibration.

There are many who have been consistent for the last twenty years in the applications of resonance collection and transfer to ground. The collection of resonance is supported by material selection { not plastic not carbon fiber not delrin not acrylic ] as well as several other key techniques. Your welcome to discover these on your own.
The same rack technology has been applied to the entire signal chain including internal and external cables. The platform is the same technology applied to a single device such as mono amps stereo subs..devices that sound better having their own separate path to ground. Some also need to brush up on their reading and comprehension skills. I have already repeated myself two and half times.

Norm

The application of resonance control to the cables was started many years ago. Though these materials added are considered passive by nature they become reactive to the electron flow as well as to floor borne and airborne vibrations. My system is wired in this manner. Thanks Tom