Where do you have your rack?

Gawdbless;

Linn of Scotland used to claim that any other speakers in your listening room, other than the ones directly connected to your main audio system will detrimentally affect the sound of that system. It was their contention that the smaller the speakers the more it would affect the sound of your big rig. By this they meant the tiny speakers that are in wristwatches, smoke detectors, alarm clocks, and television sets. I once had my local Linn dealer demonstrate this in my own room, and I have to admit that the affect of other transducers in the room did seem to have a negative effect on the sound. I forget what Linn named this phenomenon, Sympathetic something or other.

As far as having your equipment rack between your speakers, how far back would you have to have the rack behind the plain of the speakers for it to no longer negatively impact the imaging of your system? If you have bi-polar or some form of dipole radiation type speakers does this change? I have upon a recommendation from a dealer removed my large coffee table, which sits several feet out in front of my main speakers, but have to say that experimenting with it in position and removed I have not been able to detect any difference in sound.

Even telephones, according to Linn. They are probably right but I admit to having some other speakers in the room occasionally. I have my racks between and behind my speakers, probably not the best place but my room configuration makes it the most practical. If someone wants to send me a pair of Cardas GRs longer than the 2.5M ones I have I will try the side wall and report back.

The tv speakers could contribute. I have been looking for a good cover for the tv but usually just use a thick towel. Window coverings will get handled in the next fee weeks.

Tvad and stanwall-you guys hit the nail on the head for me. Those longer rca runs are (maybe by far) the weakest link in my system. Long runs of good cables get expensive fast. And the cables have to run behind a radiator. I know Jim smith says sidewall still. Just getting a few other takes. Maybe better cables plus a decent conduit are the answer.

I have decided to move mine to the sidewall; not a minor operation. Besides the unloading, moving, rebalancing etc., I have to have some more dedicated lines put in, no big job because I have a junction box within a few feet on the back of the wall I am moving them to. I was able to get a good long IC on here that should do a good job within my budget. I will let you know how it comes out. Anyone demanding a blind comparison of the two locations will be dealt with severely.