2. speakers
  3. 1211428524

Capacitor log Mundorf Silver in Oil

I wished I could find a log with information on caps. I have found many saying tremendous improvement etc. but not a detailed account of what the changes have been. I have had the same speakers for many years so am very familiar with them. (25+ years) The speakers are a set of Klipsch Lascala's. They have Alnico magnets in the mids and ceramic woofers and tweeters. The front end is Linn LP12 and Linn pre amp and amp. The speaker wire is 12 gauge and new wire.

I LOVE these speakers around 1 year ago they started to sound like garbage. As many have said they are VERY sensitive to the components before them. They are also showing what I think is the effect of worn out caps.

There are many out here on these boards I know of that are using the Klipsch (heritage) with cheaper Japanese electronics because the speakers are cheap! (for what they can do) One thing I would recommend is give these speakers the best quality musical sources you can afford. There is a LOT to get out of these speakers. My other speakers are Linn speakers at around 4k new with Linn tri-wire (I think about 1k for that) and the Klipsch DESTROY them in my mind. If you like "live feel" there is nothing like them. In fact it shocks me how little speakers have improved in 30 years (or 60 years in the Khorns instance)

In fact I question Linn's theory (that they have proved many times) that the source is the most important in the Hi-Fi chain. Linn's theory is top notch source with lessor rest of gear including speakers trumps expensive speakers with lessor source. I think is right if all things are equal but Klipsch heritage are NOT equal! They make a sound and feel that most either LOVE or hate. (I am in the LOVE camp and other speakers are boring to me)

So here goes and I hope this helps guys looking at caps in the future. Keep in mind Klipsch (heritage Khorns Belle's and Lascala's especially) are likely to show the effects of crossover changes more then most.

1 The caps are 30 years old and
2 the speakers being horn driven make changes 10x times more apparent.

Someone once told me find speakers and components you like THEN start to tweak if needed. Don't tweak something you not in love with. Makes sense to me.

So sound
Record is Let it Be (Beatles)
The voices are hard almost sounds like a worn out stylus.
Treble is very hard. I Me Mine has hard sounding guitars. Symbals sound awful. Everything has a digital vs. analog comparison x50! Paul's voice not as bad as John's and George's. Voices will crack.

different lp
Trumpets sound awful. Tambourine terrible. Bass is not great seems shy (compared to normal) but the bad caps draw soooooo much attention to the broken up mid range and hard highs that are not bright if anything it seems the highs are not working up to snuff. I have went many times to speaker to make sure tweeters are even working.

All in all they sound like crap except these Klipsch have such fantastic dynamics that even when not right they are exciting!

Makes me wonder about the people who do not like them if they are hearing worn out caps and cheap electronics? Then I can see why they do not like them! If I did not know better from 25+ years of ownership that would make sense.

For the new crossover I have chosen Mundorf Silver in Oil from what I have read and can afford. I want a warm not overly detailed sound as Klipsch already has lots of detail and does not need to be "livened up" they need lush smooth sounding caps. Hope I have made the right choice?

When the crossover is in I will do a initial impression on same lp's. Right now it goes from really bad (on what may be worn vinyl) to not as bad but NOT great on great vinyl. (I know the quality of the vinyl because tested on other speakers Linn)

The new caps are Mundorf Silver in Oil and new copper foil inductors are coming. I will at the same time be rewiring the speakers to 12 guage from the lamp cord that PWK put in. PWK was a master at getting very good sound often with crap by today's standards components.

The choice of speakers would be a toss up now depending on what I am listening to. Klipsch vastly more dynamic but if the breaking up of the sound becomes to much to effect enjoyment the Linn would be a better choice on that Lp. If I could I would switch a button back and forth between speakers depending on song and how bad the break-up sound was bothering me.

volleyguy
volleyguy OP
789 posts
 
Ait

Your comment on the bass on CAST. I would not argue at all. My speakers were known to be bass shy. So the CAST were tailor made. I do not think they overstate the bass though. My feeling (like Steen said) is that all other caps resonate high freq.. CAST do not resonate at all that I can find. So no high freq is added so seems like more bass. I agree with you but you might want to try a VSF after the CAST. I have done this in the tweeters and really like it. The VSF have all the tonality and do resonate somewhat. I find the CAST more demanding on upstream components and source material. VSF is a very forgiving part. Technically not as good as CAST but works for me.

I expect to always use a combination. By the way the Jensen is along the same lines as the CAST.
ait
480 posts
 
No way I can fit a VSF into the EQ/buffer amp. It is very small and the 10uF of Mundorfs only fit because I am using a cascade of 6.8uF, 3.3uF and 0.33uF (see picture in link). I need 10uF to reach a low frequency -3dB point of 2Hz with my amp.

RSIIb LF Equalizer

I have tried eliminating the EQ altogether, but it is needed for the RSIIb speakers for low bass extension and integration between the cone woofers and midrange panels. I have done extensive mods to the EQ, so it is now very transparent to all but the low frequencies it is meant to affect.

To my taste, the CAST/Mundorf combo is very nice - the bit of added splash on top appeals to me.
daz_bike
4 posts
 
Volleyguy,

Got your comments about Cast and then VSF in series. How about the other way round - VSF and then Cast in series? Make any difference? Reason I ask is that I need two caps in series and the fist cap is triple the size of the second cap.
stevecham
3,340 posts
 
I just want to be 1000
volleyguy OP
789 posts
 
Daz_Bike

I do remember liking it CAST/VSF over the other way but not something huge. Of course YMMV. It has been well talked about how a circuit will take a caps characteristics.

What I think helps in the thread is you can expect the same as others have got. The CAST do not resonate so this may be good for you but you WILL get less noise and this tilts the sound to more bass. My feeling is that the circuit takes the sound of the last cap the most?

I like the bloom of the VSF. We all know it was dead quiet in the studio yet for some reason we are used to a little noise? I suspect it is a the Clarity white paper says all caps resonate at a high freq so we are used to it.
More to discover