Capacitor log Mundorf Silver in Oil


I wished I could find a log with information on caps. I have found many saying tremendous improvement etc. but not a detailed account of what the changes have been. I have had the same speakers for many years so am very familiar with them. (25+ years) The speakers are a set of Klipsch Lascala's. They have Alnico magnets in the mids and ceramic woofers and tweeters. The front end is Linn LP12 and Linn pre amp and amp. The speaker wire is 12 gauge and new wire.

I LOVE these speakers around 1 year ago they started to sound like garbage. As many have said they are VERY sensitive to the components before them. They are also showing what I think is the effect of worn out caps.

There are many out here on these boards I know of that are using the Klipsch (heritage) with cheaper Japanese electronics because the speakers are cheap! (for what they can do) One thing I would recommend is give these speakers the best quality musical sources you can afford. There is a LOT to get out of these speakers. My other speakers are Linn speakers at around 4k new with Linn tri-wire (I think about 1k for that) and the Klipsch DESTROY them in my mind. If you like "live feel" there is nothing like them. In fact it shocks me how little speakers have improved in 30 years (or 60 years in the Khorns instance)

In fact I question Linn's theory (that they have proved many times) that the source is the most important in the Hi-Fi chain. Linn's theory is top notch source with lessor rest of gear including speakers trumps expensive speakers with lessor source. I think is right if all things are equal but Klipsch heritage are NOT equal! They make a sound and feel that most either LOVE or hate. (I am in the LOVE camp and other speakers are boring to me)

So here goes and I hope this helps guys looking at caps in the future. Keep in mind Klipsch (heritage Khorns Belle's and Lascala's especially) are likely to show the effects of crossover changes more then most.

1 The caps are 30 years old and
2 the speakers being horn driven make changes 10x times more apparent.

Someone once told me find speakers and components you like THEN start to tweak if needed. Don't tweak something you not in love with. Makes sense to me.

So sound
Record is Let it Be (Beatles)
The voices are hard almost sounds like a worn out stylus.
Treble is very hard. I Me Mine has hard sounding guitars. Symbals sound awful. Everything has a digital vs. analog comparison x50! Paul's voice not as bad as John's and George's. Voices will crack.

different lp
Trumpets sound awful. Tambourine terrible. Bass is not great seems shy (compared to normal) but the bad caps draw soooooo much attention to the broken up mid range and hard highs that are not bright if anything it seems the highs are not working up to snuff. I have went many times to speaker to make sure tweeters are even working.

All in all they sound like crap except these Klipsch have such fantastic dynamics that even when not right they are exciting!

Makes me wonder about the people who do not like them if they are hearing worn out caps and cheap electronics? Then I can see why they do not like them! If I did not know better from 25+ years of ownership that would make sense.

For the new crossover I have chosen Mundorf Silver in Oil from what I have read and can afford. I want a warm not overly detailed sound as Klipsch already has lots of detail and does not need to be "livened up" they need lush smooth sounding caps. Hope I have made the right choice?

When the crossover is in I will do a initial impression on same lp's. Right now it goes from really bad (on what may be worn vinyl) to not as bad but NOT great on great vinyl. (I know the quality of the vinyl because tested on other speakers Linn)

The new caps are Mundorf Silver in Oil and new copper foil inductors are coming. I will at the same time be rewiring the speakers to 12 guage from the lamp cord that PWK put in. PWK was a master at getting very good sound often with crap by today's standards components.

The choice of speakers would be a toss up now depending on what I am listening to. Klipsch vastly more dynamic but if the breaking up of the sound becomes to much to effect enjoyment the Linn would be a better choice on that Lp. If I could I would switch a button back and forth between speakers depending on song and how bad the break-up sound was bothering me.

volleyguy
Undertow:
I got a good price courtesy of David Garretson on a custom set of 16 x 25uF ClarityCap MR caps that are being made now at the factory. I priced-out the Duelund VSF and CAST versions, and found them to be staggeringly more expensive than the MRs. Also, Tannoy chose MRs for its new flagship Kingdom Royal loudspeakers, so I see the experiment as a good bet to sound good. The crossovers will be external in large, double-decker, ebonized, oak bread boxes insie which there will be plenty of room for all the large caps and coils. And I'm using MRs throughout and, yes, they are large.
Since my CD player bit the dust. Laser not working.

I have wanted high res digital for some time. I am looking at an Oppo and thinking of having it done by Modwright. I have already contacted Dan to see if a Duelund cap will fit.

Any comments on mod'ed digital players? or Oppo in general?
I have used oppo nearly 10 years. Of course not the same one, I have had about 3 players up to the current one as they progressed into blu ray. Great player, great sound, great value. I use with an external DAC, was not all that enthused about modded units, great transport, with a good DAC and I then modded the DAC and was set.

Reason because this DAC can handle any source, not just a spinning disc and it can be modded far further than a player so I keep it separate and flexible as digital has dropped off a cliff in the past 5 years and you can do just as well for 500 now as 5000 10 years ago when I replaced my Wadia with such units.
Have tried the Jensen Copper Alu Case in a similar RIAA as I have and even after 75 hours the result was the same.
Dull Dull and more Dull. This is a quality PIO and i am so disappointed. I know my ref is V-Cap CuFT but i have expected more from this cap. Properly i am not a PIO person , I don't know but this is not my cap.
Michael
I am still clocking on the hours on the VCap Cuft. They are a serious capacitor for sure and getting better all the time. I have not had a chance to install the rest of the Silver wire for direct comparison but already know the Cuft are full of details, details, details.