Help Any Krell KRC Owners


Hi

Am considering getting a second hand Krell KRC preamp for around $2,200.

Have tested it and it seems OK. The only thing is the mute button doesn't work on the tape input/output. I still make mixed tapes and will use the tape input/output. The current owner has never used it and doesn't remember if the mute button is actually meant to mute the tape loop which is located separately from other inputs.

Does any KRC owner past or present know this?

Help much appreciated.

Thanks

Kim
kim8911b075
Hi Rwwear

What I meant was the mute button does not turn the volume off at all. With mute in place, the signal still goes through to the speakers and the sound still comes out as if the mute button was not engaged at all.

Only turning the volume control to zero leads to no sound from the speakers.

Does this mean the mute button doesn't work or it was not meant to mute the tape input at all and only turning the volume down using the volume control can do so.

Thanks
For 2200 you should be getting the KRC-HR, not just the KRC. I had the later but can't remember if the mute button muted the tape...I think just the volume. Very dynamic, open, revealing soundstage. Make sure your other equipment is of equal quality or the Krell will crucify it.
For 2200 you should be getting the KRC-HR, not just the KRC. I had the later but can't remember if the mute button muted the tape...I think just the volume. Very dynamic, open, revealing soundstage. Make sure your other equipment is of equal quality or the Krell will crucify it.
Hi Audionut

Thanks for your reply. You mean from what you remember, the mute doesn't work on the tape but you need to turn the volume control off to mute the tape. Is that correct?

Also, what are the sonic differences between the KRC and the KRC-HR?

Thanks

Kim
The mute should mute the sound to your speakers but not affect the tape outs (record). The main difference between the HR and the regular version is the volume control has been replaced with a much better digital controller. HR stands for High Resolution.