I own a AI M3A and i haven't had any tube eating problems although I do use a pair of pearl tube coolers on the line stage tubes. This preamp has a pair of switches that drop the gain down it could be that only one of the switches is set to low gain and that the right channel is still set to high gain so your system has too much gain on that side which causes a lot of hiss depending on the system especially if you have a solid state amp. I would check this first since it would cost nothing to fix if that were the problem.
Need help w/ Audible Illusions M3A
First off I'll say that I'm new to owning tube gear and appreciate any advice Audiogoner's can give. I own an Audible Illusions M3A and it has developed some "hiss" in the right channel. It's loud enough to hear when the system is idling from 12 feet away, and therefore fairly annoying. It doesn't sound as though the performance is comprimised any other way though. Time for new tubes? If so, any suggestions?
Thanks in advance,
Scott
associated equipment:
Audio Research D-200
Theta Data basic
California Audio Labs Sigma II
Vandersteen 2CE
Synergistic/XLO cables
Tice Solo
Thanks in advance,
Scott
associated equipment:
Audio Research D-200
Theta Data basic
California Audio Labs Sigma II
Vandersteen 2CE
Synergistic/XLO cables
Tice Solo
- ...
- 19 posts total
- 19 posts total