mcCormack or Plinius


Ok so I got rid of the kefs and got Soliloquy 6.3 and some ht pro9 biwire and now its time for the hafler 110/220 to go .I see a used plinius 8200mkII available locally also a shop is having the dna125/rld1 on sale.I've been reading in the discussion forums about this equipment and am leaning toward the McCormack.Today I'm going to go listen to each. If any bodys got any oppinions or other suggestions, I'm still open. What I want is ss(slightly warm tuby),mm phono and a remote. I looked at Mac integrated and besides not being old enough I just couldn't get past those cheesey looking knobs.I listen mostly to folk,blues,rock and a little bit of light classical.
timunder
Hey Timunder,

If you can, do an in home audition of the Plinius gear, you will not regret it. I compared the DNA-225 and the SA-250MkIV and the Plinius was far and away better. Of course, the Plinius retails for double the price but I thought the difference was worth it. The Plinius has great sound, tremendous build quality and you can find them on Audiogon at reasonable prices. Good luck and happy hunting..........John
Do let us know what your findings are after comparing the two. I have heard the DNA-225 and found it superior to the Plinius integrated.
I have alot of experience with McCormack products and some with the Plinius. Generally, the big SA series Plinius amps will outperform the stock McCormack amps. Those big Plinius's are some of the best SS amps I've heard. The problem is that they are very expensive, very big and run too hot for my taste.

Now, if you're looking at the integrated Plinius, that's a different story versus the McCormack combo. Both are well above average products and you probably would be happy with either for a long time.

My personal recommendation though would be to go with separates and choose the older McCormack models (DNA .5 or 1 with the RLD-1). Here's the reasons:

1. Separates give you the versatility to change preamps. Preamps are very important to the quality of sound, so the ability to upgrade easily without having to change your amplification too is worth consideration. McCormack amps are very preamp/cable friendly with an input impedance of 100k.
2. The older McCormack models are even less expensive and bigger bargains. They are very reliable, so the age is not a factor. They also run relatively cool and aren't ridiculously large.
3. The older models can be modified up to a performance level that surpasses the current stock models and competes with the bigger Plinius's (and most anything else for that matter.)
4. As for intangibles, Steve McCormack is great to deal with. He is located here in the US and almost always reachable by phone if you need him. I like supporting a guy like this. When you buy one of his products, he supports it for the long haul and even updates it to state-of-art levels.

Hope that helps.
One added note to Labtec's post. Steve McCormack will soon offer mods to the newer DNA models (DNA-125 and DNA-225).