2. amps-preamps
  3. 1053087074

BAT VK75SE buzz and humming ?? help..

Hello all, received a BAT VK-75SE which by the way is a lovely Tube amp for those that are not aware.

Unfortunatly I have plugged it in and have had a constant buzz since day one.. the buzzing remains even when Interconnects are removed and ground is lifted

I have :

1. Plugged the amp in a different part of the house- No Change

2. Changed Speakers and speaker cable - No Change
3. Changed PowerCord and Lifted ground - No Change

The amp itself is dead quiet, no transformer hum or anything.. could tubes do this ? ..

thanks all in advance !

Matt
mzn50
nar_com
70 posts
 
Sounds like bad tubes.
Does this buzz come from one channel only?
If it does try to exchange left and right channel tube one-by-one to identify bad one.
In any case call BAT – they are usually very helpful.
jfrech's avatar
jfrech
1,816 posts
 
how loud is the buzz, on my 75se I have it, but much past 2-3 feet away I can't hear it....low level...

I'd call BAT...post what you find out please. Thanks
marakanetz's avatar
marakanetz
5,473 posts
 
You can test your amp by light touching of chassis arround the input tubes with screwdriver and hear if buzz increases or you hear pops. You can also bring close light bulb. Normally BAT units will not react on light bulb brought close to amplifier but if there is a bad tube they will oscillate. That will definitely indicate that tubes need to be replaced not neccessarily input ones but any of existing.
If it won't help you'd have to get in touch with BAT and probably send your unit for service.
avnut
153 posts
 
I had a "hum" problem a long long time ago. Victor troubleshot the problem in one call. Call Victor.

More to discover