2. amps-preamps
  3. 1071076282

Different sound between two channels

I have noticed recently that the sound of my left speaker is slightly different than my right speaker. The right channel appears to be brighter sounding than the left channel with the right channel sounding slightly richer sounding. I've tried reversing my speaker cables at the back of my Pass X250 and the problem kind of switches channels. I'm not sure if the problem is with my Hales T5's or the Pass X250. I think it may be a bit of both. I replaced the voice coils on both the tweeters of my Hales and the sound in general improved but the issue of the right channel being slightly brighter remains. The difference is noticable with the entire speaker as when I play just one channel or the other I notice this characteristic sound with the enire speaker. If my preamp is muted I will get a bit of residual noise from the amp in my right speaker(which is the brighter sounding speaker) and I imagine this residual noise is constant and may be causing the varient sound between the speakers. If anyone has any possible explanation or similar experience your feedback would be appreciated. I should mention that I spoke to Pass and they said it was normal for the X250 to be slightly different between it's two channels and that some residual noise in one of the channels is normal. I should also mention that what I'm experiencing is only noticable when listening right up to each speaker and is not noticable from my listening position.
128x128mitchb
mitchb's avatar
mitchb OP
336 posts
 
In living with my system I notice the problem remains and is not a loose conection or the CDP. It is subtle but it is there. Could it be a room issue even though the room appears symmetrical? I do have windows on the right side of the room but they are covered with blankets. The windows will rattle with loud bass however. The bass has to be pretty loud.The right speaker generally all around sounds slightly thinner, even the bass which does not seem to go quite as low as the left speaker. But then again it's only noticable at the speakers and not the listening position. My concern is that it's a speaker crossover problem and since Hales is out of business I wouldn't know where to begin to get the crossovers fixed or even looked at.
Please help. Thanks
mitchb's avatar
mitchb OP
336 posts
 
I figured out that I had a crossover problem with one of my speakers and am now in the process of having both crossovers redone with high end caps, coils and resistors. The crossovers of my speakers were checked by a technician and one was OK but the other was off by over 10%. The problem was in fact with the speakers. As well I noticed that the right and left channels of my Pass X250 sounded quite different so my amp is now at Pass to be looked at and adjusted or fixed where necessary. I miss my system as it is now out for repair but I'm sure I'll get a better sounding system when the amp and speakers are returned. At least I won't be haunted as to whether or not there is a problem with speakers or amp. Problems solved.
mitchb's avatar
mitchb OP
336 posts
 
I must add that my amp returned from Pass Labs sounding better than ever with both channels sounding the same as far as I can tell with the little Jamo speakers I'm using in place of my Hales.I can only imagine what the Hales will sound like with the upgrade/mod/repair done to them.
More to discover