2. amps-preamps
  3. 1073863890

Hafler 220, one channel out of sync HELP

Greetings, My older Hafler is showing some age and wear one of my channels is not operating at full capacity. I do get some sound out of it with a bit of distortion adn it fdoes respond to adjusting the volune. Changed the wiring witht the preamp and speakers around to make sure it wasn't somethimng easily replaceable but it's starting to look like time for Hafler salad surgery. Not really sure what to look for here, a new fuse change the transistors. Open for sound opinions and advice. Thanx much and have a great day, Terry
dickwettzles
jjmali
108 posts
 
I STRONGLY URGE YOU TO REPLACE THE CAPS. I have recapped several old pieces within the last two months. One of which was a Hafler DH-500. This amplifier sounded horrible; and basically couldn't be used. After the recapping, it was much nicer and is being used by a friend of mine. The caps were 20,000uf 100v, so they were sort of expensive (~$100). However, I don't think the caps in your 220 will be nearly the size. I used a site called mouser electronics to order parts. E-mail me with any questions.
marakanetz's avatar
marakanetz
5,473 posts
 
re-cap is just a part of maintainance but sometimes it can't fix the main problem.
audiopile
13 posts
 
OK - I realize this was months ago - but anytime a Hafler amp does something strange but still makes distorted sound - check the protective fusses - these are usually easily accesible from the rear panel of the amp.
If memory ( a always fallible thing at my age) serves - these fuses where placed in the feedback loop - the idea was pretty good in that you didn't have a fuse in series with the speakers ( think about how strange the idea of hooking up garden hose diameter wire between amp and speakers is - if ALL this power is going thru a hair thin fuse filament wire?) Hafler got around this - but it does mean you will get distorted sound out of a Hafler amp when the protective fuse is blown.
Finally - check the B+ and B- rail fuses - in audio hell use (bars) - I've had customers blow rail fuses and still not suceed in blowing up DH series amps. and yes - beat on 'em enough and you can break 'em.
More to discover