difference between 6922 and the 6h30 super tube

6922 is more refined, smoother more musical than the 6h30. The 6h30 can also be call supertube is more dynamic and transparent but not as much musical and smooth as the 6922 and sometimes is very dry and analytical. Also there is so much more choices for the 6922, if you are chosing the 6h30 tube you will be stuck with them since there is no choice to roll the tube.

Goone is somewhat correct. I own BAT gear with and without the 'Supertube'. I would say that the 6H30 is more dynamic and transparent than the 6922's, like Goone said. The only difference I would say is that the 6922's CAN be smoother and more musical, but only NOS, not the Sovtek's. I have Amperex 7308 PQ's in my VK-P5 (Mullards were actually too warm and mushy). The 6H30's are not for those that crave 'tubey' sound. IMO, they sound like a hybrid design. They have more warmth in the mids than typical SS (not all SS), but they are more dynamic than typical tubes.

They are not interchangeable, due to differences in plate voltages the system has to be designed to use each specific tube.

I hope this was somewhat helpful,
John

Well to add to the above...I have owned both types, including the 6922 in one of it's finest outings, the CJ ART, and also the 6H30 in the BAT SE gear.

I think alot that has added to the 6922 warm musical vs. 6H30 dryer, etc...situation is what has been done at Audio Research. My results are in favor of the 6H30, and I feel that, done properly, it is the more musically accurate.

For what it's worth, one of the best modifiers out there, Dan Wright, is now working on mods using this "super tube".