what do I upgrade?

Given your response as to what you are hearing, I advise the following:

One, get the dedicated circuits. This WILL help with the bass. It did with my stereo. Plus it provides a blacker background, which allows the music to come through cleaner. (I have the Revel Studios, which are pretty similar to your Wilson Sophias, so I think it will do the same thing for you.) You might also try to adjust the room accoustics. (Sometimes this is not possible, as there is the W.A.F. to consider, as in my case!)

After having done that, listen to stereo again, and see if this works. If not, I would consider replacing either the source (your Wadia) or your pre/pro. (Note: I am not a huge Krell fan, but if you like the sound of their amps, stick with it. me, I am a Levinson fan, so what do I know, huh?!)

If it were me, I would replace the pre/pro, but that would mess up your HT setup, wouldn't it?! I would consider a dedicated two channel preamp, possibly a tube one, as they can inject some life back into the music.

Or..... You can try an analog setup and see if that is what you are missing. (Yeah, I'm harping on that again. If you haven't tried analog (seriously tried it), and you are serious about having the music sound special, give it a shot. It really turned me back on to listening to music again.)

Anyway, my two cents worth. Good Luck in your quest!

PS If you want to try a different source, I recommend the Resolution Audio Opus 21. It is the best, most analog sounding CD player I have heard, that is reasonably priced. (Reasonably priced for us Audiophiles anyway.)

I have to agree with the majority above - Dedicated circuits and power conditioning, as well as room acoustics. Addressing each link of the audio chain will maximize the potential of your components. If you do this and are then still not satisfied, then work on the components and/or synergy of your system.

Just my opinion, but that is what I would (and did) do. :o)

I agree with several other posters above regarding the dedicated circuits/lines and line-conditioning.

However, I would specifically suggest Foundation Research LC-1 and LC-2 line-conditioners. These are both passive (no current draw onto themselves) and dedicated to one per component (what else would you use with dedicated lines?) and bi-directional filtering (mandatory for those with a digital source).

In addition, I would suggest some serious experimenting with vibration control ie de-coupling v. coupling racking systems, speaker platforms, etc..

Without properly addressing the these absolutely foundational issues, I believe it is simply impossible to realize the full potential of any system.

-IMO

Not to be repetitious but I would also go with dedicated lines first, you're happy with your Red Dawns?--stay with them, if not you can certainly do better, then, power conditioning. I'm a big Audio Magic fan, but you can do Shunyata, Sound Application, and others, as well. I treat my electric as another component. Those three steps will give you electric nirvana. Your system will thank you for it. peace, warren

My first thought is the Red Dawn may give the 'light' sound you speak of. Of course YMMV. It seems to be average cable for such a nice system.