Alón, a couple of experiments that may shed some light on what is causing the issue:
1)Disconnect the turntable from the preamp and insert shorting plugs into the preamp's phono inputs, and assess the hum and noise levels under that condition. (Have everything turned off, of course, while you make the change). Googling "RCA shorting plug" should turn up a number of such plugs you can buy, or else you could simply buy a couple of RCA plugs at Radio Shack or wherever and solder a wire between the center pin connection point and the ground sleeve connection point.
2)Temporarily, as an experiment, put a cheater plug (a 3-prong to 2-prong adapter) on the preamp's AC power plug, without connecting its safety ground (what would normally be connected to the wall plate screw) to anything. That will break any ground loops between the preamp and the other components it is connected to. Ground loops, of course, can sometimes contribute to hum and noise.
Those two experiments should help to determine if the problem is due to something internal to the preamp, or to some external influence.
Also, as I recall you purchased the Signature 2a a couple of years ago. Has this issue been present all along, or did it just arise recently?
Best regards,
-- Al
1)Disconnect the turntable from the preamp and insert shorting plugs into the preamp's phono inputs, and assess the hum and noise levels under that condition. (Have everything turned off, of course, while you make the change). Googling "RCA shorting plug" should turn up a number of such plugs you can buy, or else you could simply buy a couple of RCA plugs at Radio Shack or wherever and solder a wire between the center pin connection point and the ground sleeve connection point.
2)Temporarily, as an experiment, put a cheater plug (a 3-prong to 2-prong adapter) on the preamp's AC power plug, without connecting its safety ground (what would normally be connected to the wall plate screw) to anything. That will break any ground loops between the preamp and the other components it is connected to. Ground loops, of course, can sometimes contribute to hum and noise.
Those two experiments should help to determine if the problem is due to something internal to the preamp, or to some external influence.
Also, as I recall you purchased the Signature 2a a couple of years ago. Has this issue been present all along, or did it just arise recently?
Best regards,
-- Al