As you peer over the top;from the front of the sr9300-- on the right side of the receiver there is a row of flat black connectors U shapped;when removed.--Make sure you unplug your sr9300 first.--- the top 2--slightly to the right of the didital inputs-row -- pull them out with your finger nails. They are only 1/2 in. deep---You can just line them up and push them back in to get acquainted with how they come in and out. Still peering over the top/ from the front--The left front channel out-is the top/ and right-front-out is just below.-----That is where your ic's go---to the input of your outboard amp.--Now that you know what ic's are.
From the same position --looking over to the back of the unit---after the U shaped plugs have been removed-- the ic's go in on the right side of where these plugs came out. These actually connect the 'pre' part of your receiver to the 'amp' part of your receiver.---In that you would be using a different amp;you wouldn't want these connectors in place.
From the same position --looking over to the back of the unit---after the U shaped plugs have been removed-- the ic's go in on the right side of where these plugs came out. These actually connect the 'pre' part of your receiver to the 'amp' part of your receiver.---In that you would be using a different amp;you wouldn't want these connectors in place.