Supratek Tubes and Tube Swappin' for Everybody


I will have a Supratek Chenin in my set up in a day or so. Since so many folks are rolling tubes around here I was hoping to garner a comprehensive list of everybodies favorite tube compliments. Be it NOS or NIB or WLATB (Whatever's layin around the basement)
Being that the "Deal of the Century" thread is a little more like a novel I figured this would be a good place to post questions and answers related to one subject of Supratek amps and pres.
On to the subject of me. I don't have immediate plans to swap tubes as I've figured that Mr. Maloney would supply us with something listenable for the break in period. But, since so many have reported such dramatic improvments I want to ask this question:
What is your favorite compliment for quietest gain and dynamics in the phono stage?
I will be using the Chenin exclusively for vinyl ( I don't have a CD player) and listen to loads of early rock and roll and Jazz bands, smaller jazz bands mostly, quartets and quintets. Some classical, the usual Beethoven and Mozart, but usually just a lot of loud garage rock.
Ok, now lets see what happens.
mc5baby
Hey Larry, Congrats on the grange,I'm very jealous. I am still contemplating ordering one myself, as I have been a big fan of DHT amplification for years. My experience with the 45,2a3,300b,845 triodes etc is that they all seem to possess a certain soul,a righteousness if you will,a purity of sound that is hard to describe.Having the abilty to tune ones preamp with the soul of these various DHT triodes has got to be the ultimate front end. Kudos to the brilliance of Mick for pushing the envelope here.I am sure either choice of the various DTH triodes will sound fabulous but I have a sneaky suspician the natural beauty of WE 300b or a nos 45 will end up as the tube of choice here. Mustang..... sounds like your going to have an exciting Christmas holiday and I am eager to hear your thoughts on the voice of the different tubes in the mighty Grange.I am not at all surprised that some of you guy's are finding the mesh plate tube types to be microphonic.Most mesh plate type tubes are prone to microphonic by design.
Hi Larry, I read your last post just after I posted mine. I have to go to a hockey game and will get back a little later.
Larry,
I use Herbie's on all of my signal tubes except the 45 mesh plates. Although my preamp is equipped to run 300B, I have not tried them yet so I can't answer your question. As I posted prior, the 45's are much less microphonic than the PX/4 which I never plan to use again. No dampers in the power supply as there is no need.
I do not use 6SN7 as Mick's personal choice is the 76 in that position. I replaced the stock 76 with a pair of 1942 RCA VT-37 which made a significant improvement in the mids.
I took Whoopadeedoo's advice and ordered a pair of the special Russian 6H30 yesterday.
To address your first concern, yes there is a fair amount of microphonics with this preamplifier; it's the price we pay for greatness. Believe it or not the best device I've used and settled on is one of those Gingko rubber ball platforms. I tried cones, roller bearings, and Symposium but for this particular application the Gingko works the best. Give it a shot; they offer a money back guarantee. You'll need the Cloud 11 which is the larger version of the Cloud 10.
.
Wc & David,
.
Thanks for advice.
.
Do the 45's require the same voltage as the 300b's or the PX4’s? Can I put the 45's in my system if it can handle both the PX4's and the 300B's ?
.
Wc, have you ever listened to the 6SN7's in your system ? I just sent Brendan an email ordering a pair of 7308's per your recommendation and a quad of 6F6GT's. Presently, I have a set of Symposium Rollerblocks under both Grange boxes. Was it the Symposium Roller Blocks that you tried ? I will look into the Ginko Rubber Ball platforms.
.
David, what do you think that the differences between the 6SN7's and the76's might be in my Grange ?
.
Rgds,
Larry
.
Larry,
No I have not heard the 6SN7 as my Grange is not configured for that tube only the 76/37.
Voltage for the power tubes is:
2.5V 45
5V 300B
4V PX/4

I can switch among all 3 voltages. Nice option.