2. cables
  3. 1361730421

Interconnect with great dynamics and bass slam ,

I recently purchased some Cardas Golden cross sepaker cables. They replaced my Dh Lab Q10s. I replaced the Q10s because i was getting some upper mid freq brightness.
I have Golden Cross interconnects from preamp to amp and from cd player to pre amp. The sound is very smooth and detailed .The bass and mid bass is not as authorative or as tight. The highs are better - more detailed and smooth.
The problem is the sound is almost too smooth the bass is kind of rounded off now .The sound is less dynamic.
My Question is.
Is there an interconnect that could give me back that great bass and dynamics of that i had with the Q10s, without the harshness i was getting. I think i would like to keep the Golden Cross speaker cables and try changing the ICs. Any thoughts would be greatly appreciated.
grey9hound
audiolabyrinth's avatar
audiolabyrinth
4,555 posts
 
@waxwaves,The Air 1 and Air 2 does not use a grounding station!,the ends of the little jumpers plug into each other,go to the net and read on how to use the cable,the current offerings from tara only has what they call the extreme series cables that use an outboard grounding station,the extreme series cables are,the zero edge,the zero onyx,the zero gold.the model called the one and two and 0.8ex has ism on board,other words,a smaller grounding station made onto the cables them selfs and the jumper cables plug into them selfs on them cables too,only one side of the extreme series cables plug into each other and thats the receiving end of the signal.believe me when I say this!,It matters that you plug the jumper lead wires together on the air 1 cable that you bought!,Its the same on all their cables that have the jumpers!,please feel free to ask questions about these cables,I will help!cheers!
grey9hound OP
1,112 posts
 
Audiolabyrinth
I am here . i was just busy this past weekend.
Waxwaves
Did you get the cable yet ?
When you do , would you try it between the cd player and pre-amp . I think most systems would allow you to hear more differences in that position.
I know whenever i have tested ics , i was always able to tell a bigger difference between the Source and the Pre.
Differences were not as noticable from pre to amp ,, for me anyway .
Thanks
audiolabyrinth's avatar
audiolabyrinth
4,555 posts
 
@ grey9hound,I looked for your cables for sale on the gon but have not seen them so far.cheers!
audiolabyrinth's avatar
audiolabyrinth
4,555 posts
 
@ waxwaves,The newest version of the air one is the air oneEX,that surpasses the model you have in sound by alot,way more transparent,if you like the cable you bought,I would not get the air 2!,I would go out of my way,to get the air1EX!It is a new designed cable,a different animal of a cable you just got!bar-none,it sets the bench mark at the pricepoint it sells at for all cables!,I would dare say its 2 times better than the cable you have now!,on the other hand for what you paid for the cable you have,you will not find a better cable for the used money you paid,in other words,$500.00 to $500.00 would be the fair comparison!cheers!
audiolabyrinth's avatar
audiolabyrinth
4,555 posts
 
@ waxwaves,connecting the two small lead jumpers together turns on the rf/emi shielding,makes the cable alot more transparent!, cheers!
More to discover