Electrical problem associated with all of my amps


Since I converted an upstairs room for my new system last November, everything was great. When the weather finally turned warmer, the A/C finally kicked on. However, as soon
as the A/C turns on the amps shuts down. At first I thought the Spectral DMA200 since it draws 800 watts continously was the reason, but it does the same with any of my amps.They all shut down; as soon as the A/C is turned off the amps start right up. None of the other equipment shuts down; because when you actually turn off the amp, the capacitors discharge and the music plays for a few seconds. So is it a voltage drop and I need something like a voltage stabilizer or do I need a new line run into the house. However, what is weird, the A/C and the stereo system are on different circuit breakers.
Any ideas would be greatly appreciated!!!
shubertmaniac
Schubert -

You might want to call your electric company. There should be a 200-amp line going into your house, but a lot of older houses just have a 120-amp line going in. A friend of mine had a similar problem and he called his power company and they changed out the lines going into his home. Now the lights don't even flicker when his AC comes on.

Best of luck to you!

Duke
If I was having those problems with a 200 amp service I'd call a qualified electrician to troubleshoot & fix it.
Get your self a decent meter and check the voltage. Make sure you have really good fire insurance. Don't running expensive amp again until the problem is identified. i suspect someone will follow this entry with correct meter readings to look for.

Be careful.
Time to invest in a digital voltmeter and try to identify where the apparent low voltage condition is originating. Potential problem areas: Utility problems such as defective or overloaded transformer. Corroded or defective incoming cabling (especially if it is underground cable). Main breaker or main panel going defective (it does happen). Air Conditioner in serious need of recharge.

Year round, the available voltage on my dedicated circuit stays between 112 to 120 volts.