Copying LPs to CDs

I hope you were kidding about the wd-40. It would be disasterous to use such a product, for both your front end and your albums. However, there is a product that I have used that does work as a semi-like lubracant that decreases record wear and removes static. It is called "Groove Glide". It is a good product for albums that are in good condition, but is no answer for albums that are slightly damaged or noisy. These type of problems are best served with a good scrubing or record vacuuming, ie., VPI, Nitty Gritty, ect. You can hand scrub, however a good vacuuming is best. Afterwards if the album is still noisy, as stated before, wet playing is best. FYI,I heard about this method during the late eighties and I believe is fashionable in Europe. ENJOY!

I use WINoN CD 3.6.421 Power edition(CeQuadrat) with Windows NT. All my hardware is scsi. I have had great sucsess with 650 and 700mb audio cds. WinONCD offers a 5-band eq. ,declick, dehiss and depop filters in real time. Many other features, soon out 3.7 version...Cool Edit 2000 is GREAT!! premastering software. It offers the same but in greater depth and is upgradible w/plugins. Full product w/plugins-$150.00//w/out just basic program $69.99..check it out. -Jeff

of course wd40 is out. tap water and a watts parastat brush if you can find one or a vpi record washing brush + a small drop fodawn detergent. the biggest danger is water damaging the label, which hasnt happened to me. you can really scrub back and forth and do repeated washings when necessary. dry with paper towels, believe it or not, they leave nearly nothing on the disc. cloth always does. i have to use a carbon fiber brush (AQ will do fine) to take the cloth fibers off when using a cloth to dry with. avoid the nitty gritty and go with the vpi machine if you opt to spend real money. even the cheapest nitty which is the smae mechanically as the AA record dr.II is a waste of your bux. and why not get a stand alone cdr? the little phillips is only about $300. and you dont have to have a computer near your phono section or run long cabling.

of course wd40 is out. tap water and a watts parastat brush if you can find one or a vpi record washing brush + a small drop of dawn detergent. the biggest danger is water damaging the label, which hasnt happened to me. you can really scrub back and forth and do repeated washings when necessary. dry with paper towels, believe it or not, they leave nearly nothing on the disc. cloth always does. i have to use a carbon fiber brush (AQ will do fine) to take the cloth fibers off when using a cloth to dry with. avoid the nitty gritty and go with the vpi machine if you opt to spend real money. even the cheapest nitty which is the same mechanically as the AA record dr.II is a waste of your bux. and why not get a stand alone cdr? the little phillips is only about $300. and you dont have to have a computer near your phono section or run long cabling.

I copied an LP onto DAT with my Super Bit Mapping ADC, and transferred that 48 kHz recording into Soundforge XP 4.0 on my computer. With it, it's easy (but time consuming) to EDIT OUT THE "POPS" of the old LP. I'll then downconvert the edited version to 44.1, and burn a CD with it. COOL, HUH?