Hum in the system

I'm currently having a bit of a hum problem myself. I was originally using a Denon 2700 receiver to power my speakers but after adding a proceed amp2 the speakers started humming. Would using the balanced inputs on the amp help the problem at all?

You can buy a cheater plug from any hardware store - it is essentially a 2-prong plug, with a 3-prong socket on the other end into which you can plug your component's 3-prong plug. It is NOT intended as a device to drop the ground - it has a little metallic tab that you are supposed to screw into the wall plate - of course, if you do that, you will not have dropped the ground so people tend to bend the tab back, away from the wall plate and thus effectively drop the ground. Hum caused by hooking up a TV or VCR to your amp or receiver is cause because the cable is grounded separately from your power line - this causes a ground loop hum. In order to get rid of this hum, you have to isolate the cable ground - the safest way to do this is to buy Mondial's MAGIC box - which stands for Mondial Antenna Ground Isolation Circuit. Essentially, you connect it to the cable outlet in the wall and then run another cable from the Box to your TV or VCR as the case may be. This will get rid of the Ground loop caused by Cable TV, guaranteed. Note, that the Magic Box only has inputs and outputs that accept the standard coaxial TV cable - it can only isolate hums caused by cable tv - NOTHING ELSE - as some people seem to mistakenly believe.

I just thought I'd update what ended up happening with Shiv's DAC hum. We first dropped the ground, which worked for about a day. After being left on all night without the ground, the entire DAC died. I suspected power supply (wall wart) problems, though MSB denied the likelyhood of this. Shiv's wall wart was cold to the touch, and normally they are slightly warm whenever left plugged in. MSB wanted the whole DAC sent back, but I talked them into starting with just sending another power supply--I didn't want a customer who just purchased a new DAC to have about two weeks of downtime if it wasn't nessasary. It did end up being the power supply, and the DAC has worked just fine every since the wall wart replacement. Dealers as well as customers take note...if you even encounter the problems like at the start of this threat, begin with the power supply after a few other routine checks such as interconnects running near power cords, etc. Jeff

I get hum in my system when my Naim 3.5 cd player is plugged into the wall and the system contains and MFA Magus pre-amp. If I unplug the Naim, the hum is gone. If I replace the Magus with and Audible Illusions L1 pre-amp, there is not a hum problem with the Naim. If I replace the Naim with a Rega Planet, there is no hum with the Magus in my system. So, each piece of gear works correctly and without hum, and there is only a problem when the Naim 3.5 and Magus are in the system at the same time - but, this is my favorite combination, so I want to fix it, any insights?

Had this problem for long.Solved by a really bright guy Arnie Nudell AKA Genesis Tech.I have Three inputs into my KBA A+V Standard(KBA)=Krell Boat Anchor DVD/CD(coax)SAT(Toslink)VCR(composite analog)He said turnoff and unplug imputs.I unpluged VCR and no hum.I had tried everything.