Digitizing LPs: General advice wanted


Hi everyone,
I will soon set out to digitize a LOT of LPs.
And given the extensive labor that will involved, I DESPERATELY want to do it right the FIRST time :-).
btw, I am solely concerned with the recording process, as playback issues may always be addressed later.

At this point, I only know that I want to record at a minimum of 24/96 with a PLANAR 3 turntable.

As everything else is undetermined, I am looking for some general advice.
I.E.:
Should I use a PC or an digital recorder ?
If a PC, should I use an INTERNAL sound card or a USB sound card (so as to minimize RF nose) ?
If a digital-recorder, are there any that will record at 24/96 ?
And can they easily share files with a PC (for use with editing software, etc) ?

Any other advice, pitfals, or experiences to share ?

Many thanks for any advice you may offer :-).
captainbeyond
Despite some of the subsequent responses, I believe the original poster is trying only to archive the material in 24/96, not make CD's for convenient playback. If this is the case, it's not something I know much about, but maybe a trip to a pro sound shop would be in order? This seems like a lot of data to be stored, so maybe a hard-disk or tape-based system would be needed (or can the new DVD burners do 24/96 DVD-A?). Whatever is used for data storage, the A-to-D will still have to sound good, so try to audition a couple of solutions at home if possible. Good luck, let us know what you find!
Cap'n, it's important to know how you'll playback your digitized music for there are negative sonic effects associated with sample rate conversion. For instance, if 44.1kHz is your final playback sample rate, then your music will sound better if digitized at 44.1kHz rather than at 96kHz and down converted to 44.1kHz. Avoid SRC if at all possible. Whatever you do, record at a 24bit depth rate.

Despite the above comments which favor stand alone CDRs, computer based systems offer the potential for better sound quality and greater flexibility. The downside is that a good computer setup is fairly expensive. First, you'll need a fast computer (I prefer a Mac because of the better software selection), a pro-quality soundcard (the Lynx Two offers 192kHz A/D conversion) and vast amounts of hard disk space for file storage. For software I use t.c. works Spark XL, but there are others (Sound Forge, WaveLab, Peak). Such a system will approach $3,000, but it will sound better than and be able to do more than a simple CDR machine.
Buzzing around the net, I came across some info about the Terratec Phono Preamp and Studio software. I haven't used it, only read about it.

http://www.terratec.net/press/pressemit/ppa-studio.htm

http://www.proaudioreview.com/par/november00/TerraTec-Web.shtml
I've been burning my LP collection to CD's for about 18 Months. I've been using the "Tape Out" on my Receiver to the "Line In" of my Turtle Beach Santa Cruz Sound card on my PC. Then, I record the whole thing using Cool Edit 2000.

I've been using an Ortofon MC20 with the transformer, into a Marantz 2270, so the analog input is fairly accurate.

The whole set up seems to work very weel as I can critique the finished product on my Living Room System with impressive results (a/d/s L1590's driven by Carver TFM 55x's)

If you want to add the ability to edit the digitized copy,I recommend Cool Edits' Noise Reduction add on for another $40.
I don't know the explanation,but i have tried and tested,... that the more emphasis on the type of cartridge has more considerable effect ont the outcome of the recording quality of the cd via recording on external equipment substitutions. Tried substituting a pc to record and from an alternate stand alone recorder...couldn't tell the difference.
But obviously when a cartridge swapping was made...there it was...you could ...tell.